Thornlake soil
Wild-clay potential
Possible
Possible: a loamy layer with some clay typically about 7 to 25 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Thornlake soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Thornlake spot on the map
Rated from the USDA soil survey record for Thornlake ashy sandy loam, nonsodic surface, 0 to 2 percent slopes (Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 20% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (15).
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Thick enough to investigate (about 18 in (46 cm)).
- Note Typically starts within about 7 in (18 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- TopsoilA An ashy sandy loam layer about 0 to 7 in down: about 10% clay, low plasticity when wet, light brownish gray when moist. Weak indication
- Loamy layerBnbest layer An ashy loam layer about 7 to 25 in down: about 20% clay, moderate plasticity when wet, very pale brown when moist. Possible
- Sandy layerBkn An ashy sandy loam layer about 25 to 61 in down: about 12% clay, low plasticity when wet, light brownish gray when moist. Weak indication
What it looks like raw
The loamy layer (Bn), 7 to 25 in down in the typical profile: very pale brown (10YR 7/4), yellowish brown (10YR 5/4) moist; slightly hard, friable, slightly sticky and slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: lacustrine deposits derived from volcanic ash.
- USDA family particle-size class: ashy.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 4 map units in Oregon, in these survey areas: Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties.
By state: wild clay in Oregon.
USDA, distribution and extent: South-central Oregon. These soils are moderately extensive. MLRA 23.
USDA, geographic setting: Thornlake soils are on lakebeds. These soils formed in lacustrine deposits derived from volcanic ash. The source of the volcanic ash is ancestral Mt. Mazama. Slopes are 0 to 5 percent. Elevations range from 1,300 to 1,345 meters. The climate is semiarid and characterized by cool, moist winters and warm, dry summers. The mean annual precipitation is 200 to 250 mm, the mean annual temperature is 6 to 7 degrees C, and the frost-free period is 50 to 80 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Alyan: Strong lead
- Chancelakes: Strong lead
- Connleyhills: Strong lead
- Hayespring: Strong lead
- Moonbeam: Strong lead
- Overallflat: Strong lead
- Silverash: Strong lead
- Swalesilver: Strong lead
See it on the map
Open a Thornlake spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Thornlake ashy sandy loam, nonsodic surface, 0 to 2 percent slopes, map unit 627 in Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties.
- Official Series Description: Thornlake(revised 06/2011), established.
- Taxonomic class: Ashy, glassy, frigid Sodic Xeric Haplocambids
- Rated with rule version 2026-09-28.1; the method is on the About page.