Overallflat soil
Wild-clay potential
Strong lead
Strong lead: a clay-enriched layer typically about 7 to 14 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Overallflat soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Overallflat spot on the map
Rated from the USDA soil survey record for Overallflat ashy very fine sandy loam, pluvial lake, 0 to 2 percent slopes (Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 39% clay in the fine-earth portion.
- Note USDA labels this a "Bt" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (25): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil very sticky and very plastic (a field observation, not a ceramic test).
- Note Moderate thickness (about 7 in (18 cm)).
- Note Typically starts within about 7 in (18 cm) of the surface.
- Missing data Rock fragment content is not reported.
- Note High shrink-swell (linear extensibility about 6%): often very plastic, and prone to cracking as it dries.
- Note Engineering class CH: a clay of high plasticity in the Unified system.
Layer by layer
- TopsoilAE1 An ashy very fine sandy loam layer about 0 to 4 in down: about 16% clay, moderate plasticity when wet, light gray when moist. Weak indication
- TopsoilAE2 An ashy silt loam layer about 4 to 7 in down: about 23% clay, moderate plasticity when wet, light gray when moist. Weak indication
- Clay subsoilBtbest layer An ashy silty clay loam layer about 7 to 14 in down: about 39% clay, high plasticity when wet, brown when moist. Strong lead
- Loamy layerBkq An ashy sandy clay loam layer about 14 to 26 in down: about 22% clay, moderate plasticity when wet, olive brown when moist. Weak indication
- Sandy layerCq An ashy loamy fine sand layer about 26 to 60 in down: about 5% clay, low plasticity when wet, light yellowish brown when moist. Weak indication
What it looks like raw
The clay subsoil (Bt), 7 to 14 in down in the typical profile: brown (10YR 4/3), olive brown (2.5Y 4/3) moist; hard, firm, very sticky and very plastic. Raw colour is not fired colour.
About the soil
- Parent material: volcanic ash and lacustrine deposits derived from mixed volcanic rock.
- USDA family particle-size class: ashy.
- Drainage: moderately well drained.
Where it is mapped
Seen on the map as the most common soil in 4 map units in Oregon, in these survey areas: Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties.
By state: wild clay in Oregon.
USDA, distribution and extent: South-central Oregon. These soils are not extensive with about 6,900 acres of the series mapped to date. MLRA 23.
USDA, geographic setting: Overallflat soils are on lakebeds. These soils formed in lacustrine deposits derived from volcanic ash. Slopes are 0 to 2 percent. Elevations range from 1,345 to 1,424 meters. The climate is semiarid and characterized by cool, moist winters and warm, dry summers. The mean annual precipitation is 200 to 300 mm, the mean annual temperature is 6 to 7 degrees C, and the frost-free period is 50 to 90 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Alyan: Strong lead
- Chancelakes: Strong lead
- Connleyhills: Strong lead
- Hayespring: Strong lead
- Moonbeam: Strong lead
- Silverash: Strong lead
- Swalesilver: Strong lead
- Brabble: Promising
See it on the map
Open a Overallflat spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Overallflat ashy very fine sandy loam, pluvial lake, 0 to 2 percent slopes, map unit 500 in Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties.
- Official Series Description: Overallflat(revised 05/2011), established.
- Taxonomic class: Ashy, glassy, frigid Aquic Paleargids
- Rated with rule version 2026-09-28.1; the method is on the About page.