Reluctan soil
Wild-clay potential
Promising
Promising: a clay-enriched layer typically about 9 to 26 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Reluctan soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Reluctan spot on the map
Rated from the USDA soil survey record for Reluctan loam, 2 to 20 percent slopes (Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 30% clay in the fine-earth portion.
- Note USDA labels this a "Bt" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (20): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 17 in (43 cm)).
- Note Typically starts within about 9 in (23 cm) of the surface.
- Note Few rock fragments (about 10% by volume).
Layer by layer
- TopsoilA1 A loam layer about 0 to 2 in down: about 20% clay, moderate plasticity when wet, grayish brown when moist. Weak indication
- TopsoilA2 A sandy loam layer about 2 to 9 in down: about 15% clay, moderate plasticity when wet, brown when moist. Weak indication
- Clay subsoilBtbest layer A sandy clay loam layer about 9 to 26 in down: about 30% clay, high plasticity when wet, yellowish brown when moist. Promising
- BedrockR Bedrock about 26 to 36 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay subsoil (Bt), 9 to 26 in down in the typical profile: yellowish brown (10YR 5/4), dark yellowish brown (10YR 3/4) moist; slightly hard, friable, moderately sticky and moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: colluvium and residuum derived from volcanic rock such as basalt or welded tuff.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
- Lithic bedrock typically about 26 in (66 cm) down.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Oregon, in these survey areas: Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties; Upper Deschutes River Area, Oregon, Parts of Deschutes, Jefferson, and Klamath Counties.
By state: wild clay in Oregon.
USDA, distribution and extent: Northern Nevada and south-central Oregon. These soils are moderately extensive. The series concept and main acreage is in MLRA 25, while other acreage occurs in MLRAs 23 and 24.
USDA, geographic setting: Reluctan soils are on hills, plateaus, lava plains, and mountains. They formed in residuum and colluvium derived from volcanic rocks. Slopes are 0 to 50 percent. Elevations range from 1,310 to 2,440 meters. In Oregon elevation ranges to as low as 1,220 meters. At the lower elevations, these soils occur on north aspects. The climate is semiarid with cool, moist winters and warm, dry summers. The mean annual precipitation is 250 to 360 mm, the mean annual temperature is 6 to 7 degrees C, and the frost-free period is 50 to 100 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Moonbeam: Strong lead
- Swalesilver: Strong lead
- Alyan: Strong lead
- Chancelakes: Strong lead
- Connleyhills: Strong lead
- Hayespring: Strong lead
- Overallflat: Strong lead
- Silverash: Strong lead
See it on the map
Open a Reluctan spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Reluctan loam, 2 to 20 percent slopes, map unit 552 in Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties.
- Official Series Description: Reluctan(revised 03/2016), established.
- Taxonomic class: Fine-loamy, mixed, superactive, frigid Aridic Argixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.