Raz soil
Wild-clay potential
Possible
Possible: a loamy layer with some clay typically about 4 to 12 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Raz soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Raz-Brace complex, 2 to 10 percent slopes (Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 22% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (15).
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Moderate thickness (about 8 in (20 cm)).
- Note Typically starts within about 4 in (10 cm) of the surface.
- Note Few rock fragments (about 11% by volume).
Layer by layer
- TopsoilA A cobbly sandy loam layer about 0 to 4 in down: about 10% clay, low plasticity when wet, pale brown when moist. Weak indication
- Loamy layerBwbest layer A sandy clay loam layer about 4 to 12 in down: about 22% clay, moderate plasticity when wet, light gray when moist. Possible
- Loamy layerBq A sandy loam layer about 12 to 17 in down: about 18% clay, moderate plasticity when wet. Weak indication
- Bkqm A cemented material layer about 17 to 30 in down: USDA gives no clay percentage or texture for it. Not enough data
- Bedrock2R Bedrock about 30 to 40 in down: no clay layer to dig. Weak indication
What it looks like raw
The loamy layer (Bw), 4 to 12 in down in the typical profile: light gray (10YR 7/2), yellowish brown (10YR 5/4) moist; hard, firm and brittle, moderately sticky and moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: slope alluvium, colluvium, and residuum derived from volcanic rock such as basalt or welded tuff.
- USDA family mineralogy: mixed.
- USDA family particle-size class: loamy.
- Drainage: well drained.
- Lithic bedrock typically about 30 in (76 cm) down.
Where it is mapped
Seen on the map as the most common soil in 3 map units in Oregon, in these survey areas: Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties.
By state: wild clay in Oregon.
USDA, distribution and extent: South-central Oregon. These soils are extensive with about 400,000 acres of the series mapped to date. MLRA 23.
USDA, geographic setting: Raz soils are on lava plateaus. They typically occur on summit positions. These soils formed in slope alluvium, colluvium, and residuum derived from basalt and tuff. Slopes are 1 to 20 percent. Elevations range from 1,250 to 2,075 meters. The climate is semiarid and characterized by cold, moist winters and warm, dry summers. The mean annual precipitation is 200 to 300 mm, the mean annual temperature is 4 to 7 degrees C, and the frost-free period is 50 to 90 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Alyan: Strong lead
- Chancelakes: Strong lead
- Connleyhills: Strong lead
- Hayespring: Strong lead
- Moonbeam: Strong lead
- Overallflat: Strong lead
- Silverash: Strong lead
- Swalesilver: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 55%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Raz-Brace complex, 2 to 10 percent slopes, map unit 537 in Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties.
- Official Series Description: Raz(revised 05/2011), established.
- Taxonomic class: Loamy, mixed, superactive, frigid, shallow Xeric Haplodurids
- Rated with rule version 2026-09-28.1; the method is on the About page.