Rabbithills soil
Wild-clay potential
Possible
Possible: a loamy layer with some clay typically about 22 to 40 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Rabbithills soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Rabbithills spot on the map
Rated from the USDA soil survey record for Rabbithills gravelly loamy sand, 0 to 5 percent slopes (Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 18% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (10).
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 18 in (46 cm)).
- Note Typically starts within about 22 in (56 cm) of the surface.
- Note Few rock fragments (about 5% by volume).
Layer by layer
- TopsoilA1 A gravelly loamy sand layer about 0 to 3 in down: about 5% clay, low plasticity when wet, brown when moist. Weak indication
- TopsoilA2 A sandy loam layer about 3 to 12 in down: about 16% clay, moderate plasticity when wet, light brownish gray when moist. Weak indication
- Sandy layerBkqm A cemented fine sandy loam layer about 12 to 22 in down: about 16% clay, moderate plasticity when wet, pale brown when moist. Weak indication
- Loamy layer2BCkbest layer A loam layer about 22 to 40 in down: about 18% clay, moderate plasticity when wet, light gray when moist. Possible
- Bedrock2Cr Bedrock about 40 to 60 in down: no clay layer to dig. Weak indication
What it looks like raw
The loamy layer (2BCk), 22 to 40 in down in the typical profile: light gray (2.5Y 7/2), olive brown (2.5Y 4/4) moist; slightly hard, friable, moderately sticky and moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: alluvium and lacustrine deposits derived from mixed volcanic rock.
- USDA family mineralogy: mixed.
- USDA family particle-size class: loamy.
- Drainage: well drained.
- Paralithic bedrock typically about 40 in (102 cm) down.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Oregon, in these survey areas: Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties.
By state: wild clay in Oregon.
USDA, distribution and extent: South-central Oregon. These soils are moderately extensive. MLRA 23.
USDA, geographic setting: Rabbithills soils are on lake terraces and fan remnants. These soils formed in lacustrine deposits and alluvium derived from mixed volcanic rocks. Slopes are 0 to 20 percent. Elevations range from 1,310 to 1,525 meters. The climate is semiarid with cool, moist winters and warm, dry summers. The mean annual precipitation is 200 to 250 mm, the mean annual temperature is 7 to 9 degrees C, and the frost-free period is 80 to 100 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Alyan: Strong lead
- Chancelakes: Strong lead
- Connleyhills: Strong lead
- Hayespring: Strong lead
- Moonbeam: Strong lead
- Overallflat: Strong lead
- Silverash: Strong lead
- Swalesilver: Strong lead
See it on the map
Open a Rabbithills spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Rabbithills gravelly loamy sand, 0 to 5 percent slopes, map unit 530 in Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties.
- Official Series Description: Rabbithills(revised 05/2011), established.
- Taxonomic class: Loamy, mixed, superactive, mesic, shallow Xereptic Haplodurids
- Rated with rule version 2026-09-28.1; the method is on the About page.