Pernty soil
Wild-clay potential
Weak indication
Weak indication: no layer of Pernty shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Pernty soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Pernty gravelly silt loam, 3 to 15 percent slopes (Harney County Area, Oregon) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Bedrock or unweathered rock, not a soil layer to dig for clay.
Layer by layer
- Loamy layerH1 A gravelly silt loam layer about 0 to 3 in down: about 23% clay, moderate plasticity when wet, brown when moist. Weak indication
- Loamy layerH2 A cobbly loam layer about 3 to 8 in down: about 25% clay, moderate plasticity when wet, brown when moist. Weak indication
- Loamy layerH3 A very cobbly loam layer about 8 to 15 in down: about 30% clay, moderate plasticity when wet, yellowish brown when moist. Weak indication
- BedrockH4best layer Unweathered bedrock about 15 to 25 in down: no clay layer to dig. Weak indication
What it looks like raw
The bedrock (H4), 15 to 25 in down in the typical profile. Raw colour is not fired colour.
About the soil
- Parent material: residuum and colluvium weathered from basalt, andesite, rhyolite and/or welded tuff.
- USDA family mineralogy: mixed.
- USDA family particle-size class: loamy-skeletal.
- Drainage: well drained.
- Lithic bedrock typically about 15 in (38 cm) down.
Where it is mapped
Seen on the map as the most common soil in 3 map units in Oregon, in these survey areas: Harney County Area, Oregon; Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties.
By state: wild clay in Oregon.
USDA, distribution and extent: Northern Nevada, southern Oregon, and western Utah. These soils are extensive with about 106,000 acres of the series mapped to date. The original series concept is in MLRA 24, but more acreage occurs in MLRAs 23, 25, 26 and 47.
USDA, geographic setting: Pernty soils are on mountains, hills and lava plateaus. These soils formed in residuum and colluvium derived from volcanic rocks such as rhyolite, welded tuff, and basalt or metamorphic rocks such as chert. Slopes are 2 to 75 percent. Elevations range from 1,400 to 2,625 meters. The climate is semiarid with cool, moist winters and warm, dry summers. The mean annual precipitation is 250 to 400 mm, the mean annual temperature is 4 to 7 degrees C., and the frost-free period is 70 to 100 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Alyan: Strong lead
- Moonbeam: Strong lead
- Swalesilver: Strong lead
- Chancelakes: Strong lead
- Connleyhills: Strong lead
- Hayespring: Strong lead
- Overallflat: Strong lead
- Silverash: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Pernty gravelly silt loam, 3 to 15 percent slopes, map unit 253 in Harney County Area, Oregon.
- Official Series Description: Pernty(revised 10/2019), established.
- Taxonomic class: Loamy-skeletal, mixed, superactive, frigid Aridic Lithic Argixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.