Ninemile soil
Wild-clay potential
Promising
Promising: a clayey layer typically about 12 to 19 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Ninemile soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Ninemile spot on the map
Rated from the USDA soil survey record for Ninemile very cobbly loam, 0 to 10 percent slopes (Upper Deschutes River Area, Oregon, Parts of Deschutes, Jefferson, and Klamath Counties) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 50% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (30): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil very sticky and very plastic (a field observation, not a ceramic test).
- Note Moderate thickness (about 7 in (18 cm)).
- Note Typically starts within about 12 in (30 cm) of the surface.
- Lowers the potential Noticeable rock fragments (about 20% by volume); screening would be needed and the clay percentage applies to the fine earth only.
- Note High shrink-swell (linear extensibility about 7.5%): often very plastic, and prone to cracking as it dries.
- Note Engineering class CH: a clay of high plasticity in the Unified system.
Layer by layer
- Loamy layerH1 A very cobbly loam layer about 0 to 8 in down: about 20% clay, low plasticity when wet, dark grayish brown when moist. Weak indication
- Clay-rich layerH2 A clay layer about 8 to 12 in down: about 50% clay, high plasticity when wet, brown when moist. Possible
- Clay-rich layerH3best layer A gravelly clay layer about 12 to 19 in down: about 50% clay, high plasticity when wet, brown when moist. Promising
- BedrockH4 Unweathered bedrock about 19 to 29 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay-rich layer (H3), 12 to 19 in down in the typical profile: brown (7.5YR 4/4), dark brown (7.5YR 3/4) moist; extremely hard, extremely firm, very sticky and very plastic. Raw colour is not fired colour.
About the soil
- Parent material: residuum weathered from basalt.
- USDA family mineralogy: smectitic. Smectite-rich clays are usually very plastic and shrink a lot as they dry.
- USDA family particle-size class: clayey.
- Drainage: well drained.
- Lithic bedrock typically about 19 in (48 cm) down.
Where it is mapped
Seen on the map as the most common soil in 7 map units in Oregon, in these survey areas: Harney County Area, Oregon; Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties; Upper Deschutes River Area, Oregon, Parts of Deschutes, Jefferson, and Klamath Counties.
By state: wild clay in Oregon.
USDA, distribution and extent: Northern and western Nevada, northeastern California, and south-central Oregon. These soils are extensive with about 270,000 acres of the series mapped to date. The series concept and main acreage is in MLRA 23, while other acreage occurs in MLRA 25.
USDA, geographic setting: Ninemile soils are on hills, mountains, and plateaus. They formed in residuum and colluvium derived from volcanic rocks. Slopes are 0 to 70 percent. Elevations range from 1,585 to 2,530 meters. In Oregon elevation ranges as low as 1,250 meters. The climate is semiarid with cool, moist winters and warm, dry summers. The mean annual precipitation is 250 to 400 mm, the mean annual temperature is 4 to 7 degrees C, and the frost-free period is 50 to 100 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Moonbeam: Strong lead
- Swalesilver: Strong lead
- Alyan: Strong lead
- Chancelakes: Strong lead
- Connleyhills: Strong lead
- Hayespring: Strong lead
- Overallflat: Strong lead
- Silverash: Strong lead
See it on the map
Open a Ninemile spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Ninemile very cobbly loam, 0 to 10 percent slopes, map unit 92B in Upper Deschutes River Area, Oregon, Parts of Deschutes, Jefferson, and Klamath Counties.
- Official Series Description: Ninemile(revised 09/2019), established.
- Taxonomic class: Clayey, smectitic, frigid Aridic Lithic Argixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.