Lastcall soil
Wild-clay potential
Possible
Possible: a clay-enriched layer typically about 21 to 31 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Lastcall soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Lastcall spot on the map
Rated from the USDA soil survey record for Lastcall-Moonbeam complex, 1 to 10 percent slopes (Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 34% clay in the fine-earth portion.
- Note USDA labels this a "Bt" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (20): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Moderate thickness (about 10 in (26 cm)).
- Note Typically starts within about 21 in (53 cm) of the surface.
- Lowers the potential Noticeable rock fragments (about 20% by volume); screening would be needed and the clay percentage applies to the fine earth only.
Layer by layer
- TopsoilA1 A stony ashy sandy loam layer about 0 to 2 in down: about 10% clay, low plasticity when wet, brown when moist. Weak indication
- TopsoilA2 An ashy sandy loam layer about 2 to 7 in down: about 11% clay, low plasticity when wet, brown when moist. Weak indication
- Sandy layerBA An ashy sandy loam layer about 7 to 13 in down: about 12% clay, low plasticity when wet, brown when moist. Weak indication
- Clay subsoilBtq A cobbly ashy sandy clay loam layer about 13 to 21 in down: about 24% clay, moderate plasticity when wet, pale brown when moist. Weak indication
- Clay subsoilBtbest layer A cobbly ashy sandy clay loam layer about 21 to 31 in down: about 34% clay, high plasticity when wet, pale brown when moist. Possible
- BedrockR Bedrock about 31 to 41 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay subsoil (Bt), 21 to 31 in down in the typical profile: pale brown (10YR 6/3), dark yellowish brown (10YR 3/4) moist; hard, firm, moderately sticky and moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: volcanic ash and residuum derived from volcanic rock such as basalt.
- USDA family particle-size class: ashy.
- Drainage: well drained.
- Lithic bedrock typically about 31 in (79 cm) down.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Oregon, in these survey areas: Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties.
By state: wild clay in Oregon.
USDA, distribution and extent: South-central Oregon. These soils are moderately extensive. MLRA 23.
USDA, geographic setting: Lastcall soils are on lava plateaus. They formed in volcanic ash and residuum derived from basalt. Slopes are 0 to 15 percent. Elevations range from 1,250 to 1,585 meters. The mean annual precipitation is 250 to 300 mm, the mean annual temperature is 6 to 7 degrees C, and the frost-free period is 50 to 80 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Alyan: Strong lead
- Chancelakes: Strong lead
- Connleyhills: Strong lead
- Hayespring: Strong lead
- Moonbeam: Strong lead
- Overallflat: Strong lead
- Silverash: Strong lead
- Swalesilver: Strong lead
See it on the map
Open a Lastcall spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 45%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Lastcall-Moonbeam complex, 1 to 10 percent slopes, map unit 407 in Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties.
- Official Series Description: Lastcall(revised 04/2011), established.
- Taxonomic class: Ashy, glassy, frigid Vitritorrandic Argixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.