Giranch soil
Wild-clay potential
Promising
Promising: a clay-enriched layer typically about 23 to 29 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Giranch soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Giranch spot on the map
Rated from the USDA soil survey record for Giranch-Meld complex, 2 to 15 percent slopes (Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 50% clay in the fine-earth portion.
- Note USDA labels this a "Bt2" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (35): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil very sticky and very plastic (a field observation, not a ceramic test).
- Note Moderate thickness (about 6 in (16 cm)).
- Note Typically starts within about 23 in (58 cm) of the surface.
- Lowers the potential Noticeable rock fragments (about 30% by volume); screening would be needed and the clay percentage applies to the fine earth only.
- Note High shrink-swell (linear extensibility about 8%): often very plastic, and prone to cracking as it dries.
- Note Engineering class CH: a clay of high plasticity in the Unified system.
Layer by layer
- TopsoilA A cobbly ashy very fine sand layer about 0 to 11 in down: about 5% clay, low plasticity when wet, grayish brown when moist. Weak indication
- Clay subsoilBt1 A very gravelly ashy sandy clay loam layer about 11 to 23 in down: about 32% clay, high plasticity when wet, brown when moist. Weak indication
- Clay subsoilBt2best layer A gravelly clay layer about 23 to 29 in down: about 50% clay, high plasticity when wet, brown when moist. Promising
- Clay subsoilBtq A clay loam layer about 29 to 33 in down: about 30% clay, high plasticity when wet, yellowish brown when moist. Possible
- 2Bkqm A cemented material layer about 33 to 60 in down: USDA gives no clay percentage or texture for it. Not enough data
What it looks like raw
The clay subsoil (Bt2), 23 to 29 in down in the typical profile: brown (7.5YR 4/3), brown (7.5YR 4/3) moist; hard, very firm, very sticky and very plastic. Raw colour is not fired colour.
About the soil
- Parent material: volcanic ash mixed with alluvium derived from mixed volcanic rock.
- USDA family particle-size class: ashy-skeletal.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Oregon, in these survey areas: Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties.
By state: wild clay in Oregon.
USDA, distribution and extent: South-central Oregon. These soils are not extensive with about 1,400 acres of the series mapped to date. MLRA 23.
USDA, geographic setting: Giranch soils are on fan remnants. They formed in volcanic ash mixed with alluvium derived from volcanic rocks. Slopes are 2 to 20 percent. Elevations range from 1,345 to 1,510 meters. The climate is semiarid with cold, moist winters and warm, dry summers. The mean annual precipitation is 280 to 360 mm, the mean annual temperature is 6 to 7 degrees C, and the frost-free period is 60 to 80 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Alyan: Strong lead
- Chancelakes: Strong lead
- Connleyhills: Strong lead
- Hayespring: Strong lead
- Moonbeam: Strong lead
- Overallflat: Strong lead
- Silverash: Strong lead
- Swalesilver: Strong lead
See it on the map
Open a Giranch spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 45%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Giranch-Meld complex, 2 to 15 percent slopes, map unit 328 in Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties.
- Official Series Description: Giranch(revised 03/2011), established.
- Taxonomic class: Ashy-skeletal, glassy, frigid Vitritorrandic Durixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.