Cabinspring soil
Wild-clay potential
Possible
Possible: a clay-enriched layer typically about 30 to 36 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Cabinspring soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Cabinspring spot on the map
Rated from the USDA soil survey record for Cabinspring-Chesebro-Hayespring complex, 20 to 50 percent slopes (Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 45% clay in the fine-earth portion.
- Note USDA labels this a "2Bt2" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (30): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil very sticky and very plastic (a field observation, not a ceramic test).
- Note Moderate thickness (about 6 in (15 cm)).
- Note Typically starts about 30 in (76 cm) down; expect real digging or look for cuts and banks.
- Lowers the potential High rock content (about 60% by volume) lowers its practical promise; the clay percentage applies only to the fine earth between the rocks.
Layer by layer
- TopsoilA1 A gravelly ashy loam layer about 0 to 8 in down: about 17% clay, moderate plasticity when wet, grayish brown when moist. Weak indication
- TopsoilA2 A very gravelly ashy loam layer about 8 to 12 in down: about 16% clay, moderate plasticity when wet, dark grayish brown when moist. Weak indication
- TopsoilAB A very gravelly ashy loam layer about 12 to 24 in down: about 16% clay, moderate plasticity when wet, brown when moist. Weak indication
- Clay subsoilBt1 A very gravelly ashy loam layer about 24 to 30 in down: about 24% clay, moderate plasticity when wet, brown when moist. Weak indication
- Clay subsoil2Bt2best layer An extremely stony clay layer about 30 to 36 in down: about 45% clay, high plasticity when wet, yellowish brown when moist. Possible
- Bedrock2R Bedrock about 36 to 46 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay subsoil (2Bt2), 30 to 36 in down in the typical profile: yellowish brown (10YR 5/4), brown (10YR 4/3) moist; hard, firm, very sticky and very plastic. Raw colour is not fired colour.
About the soil
- Parent material: volcanic ash and colluvium and residuum derived from volcanic rock such as rhyodacite or rhyolite.
- USDA family particle-size class: ashy-skeletal.
- Drainage: well drained.
- Lithic bedrock typically about 36 in (91 cm) down.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Oregon, in these survey areas: Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties.
By state: wild clay in Oregon.
USDA, distribution and extent: South-central Oregon. These soils are not extensive with about 2,600 acres of the series mapped to date. MLRA 23.
USDA, geographic setting: Cabinspring soils are on hills and mountains. They typically occur on south and west-facing backslope positions. These soils formed in volcanic ash and colluvium over residuum derived from volcanic rocks such as rhyodacite. Slopes are 20 to 50 percent. Elevations range from 1,435 to 1,955 meters. The climate is semiarid and characterized by cool, moist winters and warm, dry summers. The mean annual precipitation is 250 to 360 mm, the mean annual temperature is 4 to 7 degrees C., and the frost-free period is 50 to 80 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Alyan: Strong lead
- Chancelakes: Strong lead
- Connleyhills: Strong lead
- Hayespring: Strong lead
- Moonbeam: Strong lead
- Overallflat: Strong lead
- Silverash: Strong lead
- Swalesilver: Strong lead
See it on the map
Open a Cabinspring spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 40%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Cabinspring-Chesebro-Hayespring complex, 20 to 50 percent slopes, map unit 237 in Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties.
- Official Series Description: Cabinspring(revised 12/2010), established.
- Taxonomic class: Ashy-skeletal, glassy, frigid Vitritorrandic Argixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.