Boilout soil
Wild-clay potential
Possible
Possible: a clay-enriched layer typically about 6 to 11 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Boilout soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Boilout spot on the map
Rated from the USDA soil survey record for Boilout cobbly ashy fine sandy loam, 2 to 10 percent slopes (Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 30% clay in the fine-earth portion.
- Note USDA labels this a "Btq" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (20): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Lowers the potential Thin layer (about 5 in (13 cm)), hard to collect in quantity.
- Note Typically starts within about 6 in (15 cm) of the surface.
- Note Few rock fragments (about 5% by volume).
Layer by layer
- TopsoilA1 A cobbly ashy fine sandy loam layer about 0 to 3 in down: about 8% clay, low plasticity when wet, grayish brown when moist. Weak indication
- TopsoilA2 A cobbly ashy very fine sandy loam layer about 3 to 6 in down: about 12% clay, low plasticity when wet, light brownish gray when moist. Weak indication
- Clay subsoilBtqbest layer An ashy clay loam layer about 6 to 11 in down: about 30% clay, high plasticity when wet, pale brown when moist. Possible
- Loamy layerBkq An extremely paragravelly ashy loam layer about 11 to 16 in down: about 25% clay, moderate plasticity when wet, very pale brown when moist. Weak indication
- Bkqm1 A cemented material layer about 16 to 34 in down: USDA gives no clay percentage or texture for it. Not enough data
- Bkqm2 A cemented material layer about 34 to 59 in down: USDA gives no clay percentage or texture for it. Not enough data
- Bkqm3 A cemented material layer about 59 to 62 in down: USDA gives no clay percentage or texture for it. Not enough data
What it looks like raw
The clay subsoil (Btq), 6 to 11 in down in the typical profile: pale brown (10YR 6/3), brown (10YR 4/3) moist; hard, firm, moderately sticky and moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: eolian material mixed with volcanic ash over residuum derived from basalt or tuff.
- USDA family particle-size class: ashy.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Oregon, in these survey areas: Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties.
By state: wild clay in Oregon.
USDA, distribution and extent: South-central Oregon. These soils are moderately extensive. MLRA 23.
USDA, geographic setting: Boilout soils are on lava plateaus and hills. These soils formed in eolian material with a high content of volcanic ash over residuum derived from basalt or tuff. Slopes are 2 to 10 percent. Elevations range from 1,310 to 1,505 meters. The climate is semiarid with cool, moist winters and warm, dry summers. The mean annual precipitation is 200 to 250 mm, mean annual temperature is 7 to 9 degrees C., and the frost-free period is 80 to 100 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Alyan: Strong lead
- Chancelakes: Strong lead
- Connleyhills: Strong lead
- Hayespring: Strong lead
- Moonbeam: Strong lead
- Overallflat: Strong lead
- Silverash: Strong lead
- Swalesilver: Strong lead
See it on the map
Open a Boilout spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Boilout cobbly ashy fine sandy loam, 2 to 10 percent slopes, map unit 214 in Lake County, Oregon, Northern Part, Parts of Lake and Klamath Counties.
- Official Series Description: Boilout(revised 11/2010), established.
- Taxonomic class: Ashy, glassy, mesic, shallow Vitrixerandic Argidurids
- Rated with rule version 2026-09-28.1; the method is on the About page.