Wharton soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 31 to 46 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Wharton soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Wharton spot on the map
Rated from the USDA soil survey record for Wharton silt loam, 3 to 8 percent slopes (Venango County, Pennsylvania) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 34% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (24): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 15 in (38 cm)).
- Note Typically starts about 31 in (79 cm) down; expect real digging or look for cuts and banks.
- Note Few rock fragments (about 10% by volume).
Layer by layer
- TopsoilAp A silt loam layer about 0 to 9 in down: about 18% clay, moderate plasticity when wet, dark grayish brown when moist. Possible
- Clay subsoilBt1 A silt loam layer about 9 to 16 in down: about 25% clay, moderate plasticity when wet, yellowish brown when moist. Possible
- Clay subsoilBt2 A silt loam layer about 16 to 22 in down: about 26% clay, moderate plasticity when wet, yellowish brown when moist. Possible
- Clay subsoilBt3 A silt loam layer about 22 to 31 in down: about 25% clay, moderate plasticity when wet, brown when moist. Possible
- Loamy layerBCbest layer A silty clay loam layer about 31 to 46 in down: about 34% clay, high plasticity when wet, dark yellowish brown when moist. Promising
- Loamy layerC A channery silty clay loam layer about 46 to 69 in down: about 29% clay, high plasticity when wet, brown when moist. Possible
- BedrockCr Bedrock about 69 to 79 in down: no clay layer to dig. Weak indication
What it looks like raw
The loamy layer (BC), 31 to 46 in down in the typical profile: dark yellowish brown (10YR 4/4); silty clay loam; firm, moderately sticky and moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: fine-loamy residuum weathered from shale and siltstone.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: moderately well drained.
- Paralithic bedrock typically about 69 in (175 cm) down.
Where it is mapped
Seen on the map as the most common soil in 4 map units in Pennsylvania, in these survey areas: Venango County, Pennsylvania; Warren and Forest Counties, Pennsylvania.
By state: wild clay in Pennsylvania.
USDA, distribution and extent: Distribution: Pennsylvania, Kentucky, Maryland, New York, Ohio, Virginia, and West Virginia; mainly MLRA's 124, 125, 126, 127, and 128
USDA, geographic setting: MLRA(s) using this series: 124 (Western Allegheny Plateau), 125 (Cumberland Plateau and Mountains), 126 (Central Allegheny Plateau), 127 (Eastern Allegheny Plateau and Mountains), and 128 (Southern Appalachian Ridges and Valleys)
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Cavode: Strong lead
- Armagh: Strong lead
- Ernest: Promising
- Brinkerton: Promising
- Shelmadine: Promising
- Alvira: Possible
- Atkins: Possible
- Cookport: Possible
See it on the map
Open a Wharton spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 80%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Wharton silt loam, 3 to 8 percent slopes, map unit WhB in Venango County, Pennsylvania.
- Official Series Description: Wharton(revised 09/2015), established.
- Taxonomic class: Fine-loamy, mixed, active, mesic Aquic Hapludults
- Rated with rule version 2026-09-28.1; the method is on the About page.