Armagh soil
Wild-clay potential
Strong lead
Strong lead: a clayey layer typically about 12 to 48 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Armagh soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Armagh silt loam, 0 to 8 percent slopes (Warren and Forest Counties, Pennsylvania) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 39% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (17).
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 36 in (92 cm)).
- Note Typically starts within about 12 in (30 cm) of the surface.
- Note Few rock fragments (about 11% by volume).
Layer by layer
- Loamy layerH1 A silt loam layer about 0 to 12 in down: about 24% clay, moderate plasticity when wet, gray when moist. Possible
- Clay-rich layerH2best layer A silty clay loam layer about 12 to 48 in down: about 39% clay, moderate plasticity when wet, light gray when moist. Strong lead
- Clay-rich layerH3 A very channery silty clay loam layer about 48 to 60 in down: about 35% clay, moderate plasticity when wet, light gray when moist. Weak indication
What it looks like raw
The clay-rich layer (H2), 12 to 48 in down in the typical profile: light gray (10YR 7/1); firm, moderately sticky and moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: residuum weathered from shale.
- USDA family mineralogy: mixed.
- USDA family particle-size class: clayey.
- Drainage: poorly drained.
- Paralithic bedrock typically about 60 in (152 cm) down.
- Rated hydric (wetland) soil; often saturated and protected.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Pennsylvania, in these survey areas: Warren and Forest Counties, Pennsylvania.
By state: wild clay in Pennsylvania.
USDA, distribution and extent: Appalachian Plateau of western Pennsylvania and western Maryland. MLRA's 124, 126, 127, and 147. The series is of moderate extent.
USDA, geographic setting: Armagh soils are on broad ridgetops and benches. Slopes range from 0 to 8 percent. These soils developed in materials weathered from acid gray shale, with some interbedded siltstone and sandstone. The mean annual precipitation ranges from 890 to 1220 millimeters, and mean annual temperature ranges from 7.2 to 13.8 degrees C.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Cavode: Strong lead
- Brinkerton: Promising
- Ernest: Promising
- Shelmadine: Promising
- Wharton: Promising
- Alvira: Possible
- Atkins: Possible
- Cookport: Possible
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Armagh silt loam, 0 to 8 percent slopes, map unit AgB in Warren and Forest Counties, Pennsylvania.
- Official Series Description: Armagh(revised 04/2025), established.
- Taxonomic class: Fine, mixed, active, mesic Typic Endoaquults
- Rated with rule version 2026-09-28.1; the method is on the About page.