Cavode soil
Wild-clay potential
Strong lead
Strong lead: a clay-enriched layer typically about 10 to 47 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Cavode soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Cavode silt loam, 3 to 8 percent slopes (Venango County, Pennsylvania) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 37% clay in the fine-earth portion.
- Note USDA labels this a "Btg" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (26): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 37 in (94 cm)).
- Note Typically starts within about 10 in (25 cm) of the surface.
- Note Few rock fragments (about 6% by volume).
Layer by layer
- TopsoilAp A silt loam layer about 0 to 10 in down: about 25% clay, moderate plasticity when wet, brown when moist. Weak indication
- Clay subsoilBtgbest layer A silty clay loam layer about 10 to 47 in down: about 37% clay, high plasticity when wet, grayish brown when moist. Strong lead
- Loamy layerBCg A channery silt loam layer about 47 to 57 in down: about 26% clay, moderate plasticity when wet, gray when moist. Weak indication
- BedrockR Bedrock about 57 to 67 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay subsoil (Btg), 10 to 47 in down in the typical profile: grayish brown (10YR 5/2); firm, moderately sticky and moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: acid clayey residuum weathered from clayey shale.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine.
- Drainage: somewhat poorly drained.
- Lithic bedrock typically about 57 in (145 cm) down.
Where it is mapped
Seen on the map as the most common soil in 5 map units in Pennsylvania, in these survey areas: Venango County, Pennsylvania; Warren and Forest Counties, Pennsylvania.
By state: wild clay in Pennsylvania.
USDA, distribution and extent: MLRA's 124, 126 and 127 in western Pennsylvania, western Maryland, southern New York, and West Virginia. The series is of large extent.
USDA, geographic setting: Cavode soils are on broad nearly level to moderately steep upland ridgetops, sideslopes, and benches with slopes of 0 to 25 percent, but most slopes are 0 to 15 percent. The soils developed in materials weathered from acid gray and yellow shale with some interbedded siltstone and thin-bedded sandstone. The climate is humid temperate. Mean annual air temperature ranges from 8.3 to 12.7 C and the mean annual precipitation ranges from 914 to 1422 millimeters.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Armagh: Strong lead
- Ernest: Promising
- Wharton: Promising
- Brinkerton: Promising
- Shelmadine: Promising
- Alvira: Possible
- Atkins: Possible
- Cookport: Possible
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Cavode silt loam, 3 to 8 percent slopes, map unit ClB in Venango County, Pennsylvania.
- Official Series Description: Cavode(revised 04/2025), established.
- Taxonomic class: Fine, mixed, active, mesic Aeric Endoaquults
- Rated with rule version 2026-09-28.1; the method is on the About page.