Alvira soil
Wild-clay potential
Possible
Possible: a clay-enriched layer typically about 7 to 21 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Alvira soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Alvira silt loam, 0 to 3 percent slopes (Venango County, Pennsylvania) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 27% clay. It may need settling or refining to become a clay body.
- Note USDA labels this a "Bt" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (10).
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Thick enough to investigate (about 14 in (35 cm)).
- Note Typically starts within about 7 in (18 cm) of the surface.
- Note Few rock fragments (about 14% by volume).
Layer by layer
- TopsoilAp A silt loam layer about 0 to 7 in down: about 15% clay, moderate plasticity when wet, brown when moist. Weak indication
- Clay subsoilBtbest layer A silt loam layer about 7 to 21 in down: about 27% clay, moderate plasticity when wet, yellowish brown when moist. Possible
- Clay subsoilBtx A gravelly silt loam layer about 21 to 72 in down: about 27% clay, moderate plasticity when wet, yellowish brown when moist. Weak indication
What it looks like raw
The clay subsoil (Bt), 7 to 21 in down in the typical profile: yellowish brown (10YR 5/4); friable, slightly sticky, slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: loamy till.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: somewhat poorly drained.
Where it is mapped
Seen on the map as the most common soil in 14 map units in Pennsylvania, in these survey areas: Carbon County, Pennsylvania; Schuylkill County, Pennsylvania; Venango County, Pennsylvania; Warren and Forest Counties, Pennsylvania.
By state: wild clay in Pennsylvania.
USDA, distribution and extent: Glaciated portions of northwestern and east central Pennsylvania. MLRA's 139, 140, and 147. The series is of large extent, over 140,000 acres.
USDA, geographic setting: Alvira soils are primarily in glaciated upland areas with smooth to slightly concave slopes. Gradients are about 0 to 15 percent. The soils developed in loamy pre-Wisconsin glacial till derived from sandstone, siltstone, shale, and some quartzite similar to the underlying rock. The climate is humid temperate; mean annual temperature ranges from 10 to 13 degrees C.; the frost free season ranges from about 120 to 170 days; mean annual rainfall ranges from 965 to 1170 millimeters.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Cavode: Strong lead
- Armagh: Strong lead
- Shelmadine: Promising
- Ernest: Promising
- Wharton: Promising
- Brinkerton: Promising
- Comly: Promising
- Holly: Promising
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Alvira silt loam, 0 to 3 percent slopes, map unit AlA in Venango County, Pennsylvania.
- Official Series Description: Alvira(revised 04/2025), established.
- Taxonomic class: Fine-loamy, mixed, active, mesic Aeric Fragiaquults
- Rated with rule version 2026-09-28.1; the method is on the About page.