Wayland soil
Wild-clay potential
Possible
Possible: a loamy layer with some clay typically about 7 to 36 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Wayland soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Wayland spot on the map
Rated from the USDA soil survey record for Wayland silt loam (Warren and Forest Counties, Pennsylvania) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 27% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (10).
- Note The official series description calls the wet soil slightly sticky.
- Note Thick enough to investigate (about 29 in (73 cm)).
- Note Typically starts within about 7 in (18 cm) of the surface.
- Note Few rock fragments (about 2% by volume).
Layer by layer
- TopsoilAp A silt loam layer about 0 to 7 in down: about 25% clay, moderate plasticity when wet, very dark grayish brown when moist. Weak indication
- Loamy layerBgbest layer A silt loam layer about 7 to 36 in down: about 27% clay, moderate plasticity when wet, dark grayish brown when moist. Possible
- Loamy layerC A stratified gravelly fine sandy loam to silt loam layer about 36 to 64 in down: about 20% clay, moderate plasticity when wet, gray when moist. Weak indication
What it looks like raw
The loamy layer (Bg), 7 to 36 in down in the typical profile: dark grayish brown (10YR 4/2); friable; slightly sticky. Raw colour is not fired colour.
About the soil
- Parent material: recent alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: poorly drained.
- Rated hydric (wetland) soil; often saturated and protected.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Pennsylvania, in these survey areas: Warren and Forest Counties, Pennsylvania.
By state: wild clay in Pennsylvania.
USDA, distribution and extent: Southern and western New York, northern Pennsylvania and north-eastern Ohio. MLRAs 101, 139, 140, 142 and 144A. The soils are of large extent.
USDA, geographic setting: Wayland soils are on nearly level or depressed parts of flood plains of streams receiving runoff from uplands that contain some calcareous drift. They are mainly in or bordering areas of Wisconsin glaciation. Slope ranges from 0 through 3 percent. The climate is humid temperate. Mean annual precipitation ranges from 795 to 1725 mm (31 to 68 in); mean annual temperature ranges from 6 to 11 degrees C (43 to 52 degrees F), and mean frost-free period ranges from 105 to 180 days. The elevation ranges from 50 to 600 m (164 to 1968 ft) above sea level.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Armagh: Strong lead
- Cavode: Strong lead
- Brinkerton: Promising
- Ernest: Promising
- Shelmadine: Promising
- Wharton: Promising
- Alvira: Possible
- Atkins: Possible
See it on the map
Open a Wayland spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 95%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Wayland silt loam, map unit Wa in Warren and Forest Counties, Pennsylvania.
- Official Series Description: Wayland(revised 09/2013), established.
- Taxonomic class: Fine-silty, mixed, active, nonacid, mesic Fluvaquentic Endoaquepts
- Rated with rule version 2026-09-28.1; the method is on the About page.