Olical soil
Wild-clay potential
Weak indication
Weak indication: no layer of Olical shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Olical soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Olical-Spofford silt loams, 3 to 8 percent slopes (Asotin County Area, Washington (Asotin and Garfield Counties)) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 15% clay.
- Note Moderate engineering plasticity index (7).
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Thick enough to investigate (about 43 in (109 cm)).
- Note Typically starts within about 17 in (43 cm) of the surface.
- Missing data Rock fragment content is not reported.
- Note USDA reports about 20% calcium carbonate; lime in a clay body deserves testing.
Layer by layer
- Sandy layerH1 A silt loam layer about 0 to 10 in down: about 15% clay, moderate plasticity when wet, dark grayish brown when moist. Weak indication
- Sandy layerH2 A silt loam layer about 10 to 17 in down: about 15% clay, moderate plasticity when wet, brown when moist. Weak indication
- Sandy layerH3best layer A silt loam layer about 17 to 60 in down: about 15% clay, moderate plasticity when wet, pale brown when moist. Weak indication
What it looks like raw
The sandy layer (H3), 17 to 60 in down in the typical profile: pale brown (10YR 6/3), brown (10YR 5/3) moist; slightly hard, friable, slightly sticky and slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: loess.
- USDA family mineralogy: mixed.
- USDA family particle-size class: coarse-silty.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 3 map units in Washington, in these survey areas: Asotin County Area, Washington (Asotin and Garfield Counties).
By state: wild clay in Washington.
USDA, distribution and extent: Eastern Washington. Series is of small extent.
USDA, geographic setting: Olical soils are on plateaus and hillslopes at elevations of 690 to 2,700 feet. Slopes are 0 to 30 percent. Olical soils formed in loess. Summers are warm and dry, winters are cool and moist. The average annual precipitation is 12 to 16 inches. The average July temperature is 68 to 73 degrees F. The average January temperature is 22 to 32 degrees F. The mean annual air temperature is 47 to 52 degrees F. The frost-free season is 110 to 170 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Cloverland: Strong lead
- Weissenfels: Promising
- Alpowa: Weak indication
- Asotin: Weak indication
- Bolicker: Weak indication
- Bridgewater: Weak indication
- Chard: Weak indication
- Dallesport: Weak indication
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 45%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Olical-Spofford silt loams, 3 to 8 percent slopes, map unit 82 in Asotin County Area, Washington (Asotin and Garfield Counties).
- Official Series Description: Olical(revised 10/2002), established.
- Taxonomic class: Coarse-silty, mixed, superactive, mesic Calcic Haploxerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.