Wapshilla soil
Wild-clay potential
Weak indication
Weak indication: no layer of Wapshilla shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Wapshilla soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Wapshilla spot on the map
Rated from the USDA soil survey record for Wapshilla loam, 30 to 60 percent slopes (Adams-Washington Area, Parts of Adams and Washington Counties, Idaho) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 28% clay in the fine-earth portion.
- Note USDA labels this a "Bt2" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (19).
- Note Thick enough to investigate (about 38 in (96 cm)).
- Note Typically starts within about 22 in (56 cm) of the surface.
- Lowers the potential High rock content (about 39% by volume) lowers its practical promise; the clay percentage applies only to the fine earth between the rocks.
Layer by layer
- Organic top layerOi An organic top layer about 0 to 1 in down, not a clay body. Weak indication
- TopsoilA A loam layer about 1 to 11 in down: about 12% clay, moderate plasticity when wet, brown when moist. Weak indication
- Clay subsoilBt1 A gravelly loam layer about 11 to 22 in down: about 17% clay, moderate plasticity when wet, light brown when moist. Weak indication
- Clay subsoilBt2best layer A very gravelly clay loam layer about 22 to 60 in down: about 28% clay, moderate plasticity when wet, light yellowish brown when moist. Weak indication
What it looks like raw
The clay subsoil (Bt2), 22 to 60 in down in the typical profile: light yellowish brown (10YR 6/4), brown (7.5YR 4/4) moist. Raw colour is not fired colour.
About the soil
- Parent material: loess and/or colluvium derived from igneous rock.
- USDA family mineralogy: mixed.
- USDA family particle-size class: loamy-skeletal.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Idaho, in these survey areas: Adams-Washington Area, Parts of Adams and Washington Counties, Idaho.
By state: wild clay in Idaho.
USDA, distribution and extent: Northern Idaho. Series is inextensive.
USDA, geographic setting: Wapshilla soils are on high plateaus, mountains, and high north-facing canyon walls, and have gradients of 8 to 90 percent. They formed in loess mixed with basalt colluvium. Elevations are 3,500 to 5,000 feet. The climate is humid with snowy winter and moderately warm dry summers. Average annual precipitation is 26 to 28 inches. Average January temperature is 24 degrees F.; average July temperature is 65 degrees F. Average annual temperature is 41 degrees to 45 degrees F. Frost-free season is about 60 to 80 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Cabarton: Strong lead
- Sudpeak: Strong lead
- Blackwell: Promising
- Culdecole: Promising
- Swede: Promising
- Ticanot: Possible
- Bluebell: Weak indication
- Brody: Weak indication
See it on the map
Open a Wapshilla spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Wapshilla loam, 30 to 60 percent slopes, map unit 201 in Adams-Washington Area, Parts of Adams and Washington Counties, Idaho.
- Official Series Description: Wapshilla(revised 03/2002), established.
- Taxonomic class: Loamy-skeletal, mixed, superactive Umbric Haplocryalfs
- Rated with rule version 2026-09-28.1; the method is on the About page.