Tacoma soil
Wild-clay potential
Weak indication
Weak indication: no layer of Tacoma shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Tacoma soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Tacoma silt loam (Kitsap County Area, Washington) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 20% clay. It may need settling or refining to become a clay body.
- Lowers the potential Low engineering plasticity index (5): little plastic behavior expected when wet.
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Thick enough to investigate (about 30 in (76 cm)).
- Note Typically starts within about 6 in (15 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Sandy layerH1 A mucky silt loam layer about 0 to 6 in down: about 12% clay, low plasticity when wet, dark brown when moist. Weak indication
- Loamy layerH2best layer A loam layer about 6 to 36 in down: about 20% clay, low plasticity when wet, dark grayish brown when moist. Weak indication
- Sandy layerH3 A very gravelly coarse sand layer about 36 to 60 in down: about 6% clay, low plasticity when wet, grayish brown when moist. Weak indication
What it looks like raw
The loamy layer (H2), 6 to 36 in down in the typical profile: dark grayish brown (10YR 4/2), light brownish gray (10YR 6/2) dry; hard, friable; slightly sticky and slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: coarse-silty.
- Drainage: very poorly drained.
- Rated hydric (wetland) soil; often saturated and protected.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Washington, in these survey areas: Kitsap County Area, Washington.
By state: wild clay in Washington.
USDA, distribution and extent: Puget Sound Area of Western Washington. The series is of small extent.
USDA, geographic setting: Tacoma soils are on tidal flats, flood plains at the mouth of rivers on deltas. Slopes are 0 to 2 percent. Elevation is 0 to 20 feet. The soils formed in alluvial deposits and thin layers of organic matter. Many areas have been diked to keep the sea water out. Average annual precipitation ranges from 25 to 60 inches. Mean January temperature is 38 degrees F; mean July temperature is 64 degrees F. The mean annual air temperature is 46 to 52 degrees F. The frost-free season is 160 to 200 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Bellingham: Strong lead
- McKenna: Promising
- Shalcar: Promising
- Kitsap: Possible
- Alderwood: Weak indication
- Belfast: Weak indication
- Harstine: Weak indication
- Indianola: Weak indication
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 100%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Tacoma silt loam, map unit 62 in Kitsap County Area, Washington.
- Official Series Description: Tacoma(revised 06/2005), established.
- Taxonomic class: Coarse-silty, mixed, superactive, acid, mesic Sulfic Endoaquepts
- Rated with rule version 2026-09-28.1; the method is on the About page.