Bellingham soil
Wild-clay potential
Strong lead
Strong lead: a clayey layer typically about 8 to 60 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Bellingham soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Bellingham spot on the map
Rated from the USDA soil survey record for Bellingham silty clay loam (Kitsap County Area, Washington) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 48% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (30): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil very sticky and very plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 52 in (132 cm)).
- Note Typically starts within about 8 in (20 cm) of the surface.
- Note Few rock fragments (about 2% by volume).
- Note High shrink-swell (linear extensibility about 7.5%): often very plastic, and prone to cracking as it dries.
- Note Engineering class CH: a clay of high plasticity in the Unified system.
Layer by layer
- Loamy layerH1 A silty clay loam layer about 0 to 8 in down: about 34% clay, high plasticity when wet, black when moist. Promising
- Clay-rich layerH2best layer A silty clay layer about 8 to 60 in down: about 48% clay, high plasticity when wet, dark gray when moist. Strong lead
What it looks like raw
The clay-rich layer (H2), 8 to 60 in down in the typical profile: dark gray (5Y 4/1), white (5Y 8/1) dry; very hard, firm, very sticky and very plastic. Raw colour is not fired colour.
About the soil
- Parent material: alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine.
- Drainage: poorly drained.
- Rated hydric (wetland) soil; often saturated and protected.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Washington, in these survey areas: Kitsap County Area, Washington.
By state: wild clay in Washington.
USDA, distribution and extent: This series is of moderate extent in the Puget Sound Area and on the north end of the Olympic Peninsula; MLRA 2.
USDA, geographic setting: Bellingham soils are in depressions at elevations of 20 to 600 feet. Slopes are 0 to 3 percent. These soils formed in loess, alluvium and lacustrine sediments. The climate is characterized by cool, dry summers and cool, moist winters. Average annual precipitation is 25 to 60 inches. Average January temperature is about 39 degrees F; average July temperature is about 64 degrees F; and the mean annual temperature is about 50 degrees F. Frost-free season is 150 to 210 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- McKenna: Promising
- Shalcar: Promising
- Kitsap: Possible
- Alderwood: Weak indication
- Belfast: Weak indication
- Harstine: Weak indication
- Indianola: Weak indication
- Kapowsin: Weak indication
See it on the map
Open a Bellingham spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Bellingham silty clay loam, map unit 6 in Kitsap County Area, Washington.
- Official Series Description: Bellingham(revised 05/2000), established.
- Taxonomic class: Fine, mixed, superactive, nonacid, mesic Vertic Endoaquepts
- Rated with rule version 2026-09-28.1; the method is on the About page.