Simonton soil
Wild-clay potential
Promising
Promising: a clay-enriched layer typically about 4 to 42 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Simonton soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Simonton spot on the map
Rated from the USDA soil survey record for Simonton loam, 2 to 12 percent slopes (Elmore County Area, Idaho, Parts of Elmore and Owyhee Counties) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 28% clay in the fine-earth portion.
- Note USDA labels this a "Bt" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (20): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 38 in (97 cm)).
- Note Typically starts within about 4 in (10 cm) of the surface.
- Note Few rock fragments (about 14% by volume).
Layer by layer
- TopsoilA A loam layer about 0 to 4 in down: about 15% clay, moderate plasticity when wet, grayish brown when moist. Weak indication
- Clay subsoilBtbest layer A clay loam layer about 4 to 42 in down: about 28% clay, high plasticity when wet, pale brown when moist. Promising
- Sandy layerC A sandy loam layer about 42 to 60 in down: about 8% clay, low plasticity when wet, light brown when moist. Weak indication
What it looks like raw
The clay subsoil (Bt), 4 to 42 in down in the typical profile: pale brown (10YR 6/3), dark brown (7.5YR 4/4) moist; hard, firm, sticky and plastic. Raw colour is not fired colour.
About the soil
- Parent material: alluvium and/or colluvium derived from igneous rock.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Idaho, in these survey areas: Elmore County Area, Idaho, Parts of Elmore and Owyhee Counties.
By state: wild clay in Idaho.
USDA, distribution and extent: Southern Idaho and northern Nevada. The series is moderately extensive.
USDA, geographic setting: Simonton soils are on alluvial fan terraces, mountainsides, and foothills and have slopes of 0 to 30 percent. Elevations are 4,500 to 6,200 feet. The soils formed in alluvium and colluvium weathered from granite, andesite, rhyolite and minor amounts of basalt. The average annual precipitation is 12 to 20 inches. The average January temperature is 15 degrees F., the average July temperature is 66 degrees F., and the average annual temperature is 40 to 45 degrees F. The frost-free period is about 60 to 100 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Chilcott: Strong lead
- Kunaton: Strong lead
- Farrot: Promising
- Haw: Promising
- Brownlee: Possible
- Colthorp: Possible
- Elkcreek: Possible
- Lankbush: Possible
See it on the map
Open a Simonton spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 75%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Simonton loam, 2 to 12 percent slopes, map unit 149 in Elmore County Area, Idaho, Parts of Elmore and Owyhee Counties.
- Official Series Description: Simonton(revised 10/2002), established.
- Taxonomic class: Fine-loamy, mixed, superactive, frigid Ultic Argixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.