Kunaton soil
Wild-clay potential
Strong lead
Strong lead: a clay-enriched layer typically about 4 to 13 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Kunaton soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Kunaton spot on the map
Rated from the USDA soil survey record for Kunaton silty clay loam, 0 to 2 percent slopes (Ada County, Idaho) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 40% clay in the fine-earth portion.
- Note USDA labels this a "Btk" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (21): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Moderate thickness (about 9 in (23 cm)).
- Note Typically starts within about 4 in (10 cm) of the surface.
- Missing data Rock fragment content is not reported.
- Note USDA reports about 10% calcium carbonate; lime in a clay body deserves testing.
Layer by layer
- Sandy layerE A silt loam layer about 0 to 4 in down: about 17% clay, moderate plasticity when wet, pale brown when moist. Weak indication
- Clay subsoilBtkbest layer A silty clay layer about 4 to 13 in down: about 40% clay, high plasticity when wet, very pale brown when moist. Strong lead
- Bkqm A cemented material layer about 13 to 25 in down: USDA gives no clay percentage or texture for it. Not enough data
- BedrockR Bedrock about 25 to 35 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay subsoil (Btk), 4 to 13 in down in the typical profile: very pale brown (10YR 7/3), dark yellowish brown (10YR 4/4) moist; hard, friable, sticky and plastic. Raw colour is not fired colour.
About the soil
- Parent material: mixed alluvium and/or loess over bedrock derived from basalt.
- USDA family mineralogy: smectitic. Smectite-rich clays are usually very plastic and shrink a lot as they dry.
- USDA family particle-size class: clayey.
- Drainage: well drained.
- Lithic bedrock typically about 25 in (64 cm) down.
Where it is mapped
Seen on the map as the most common soil in 8 map units in Idaho, in these survey areas: Ada County, Idaho; Elmore County Area, Idaho, Parts of Elmore and Owyhee Counties.
By state: wild clay in Idaho.
USDA, distribution and extent: Southwestern Idaho. The soils are moderately extensive.
USDA, geographic setting: Kunaton soils are on basalt plains. Elevations range from 2,700 to 4,200 feet. Slopes are 0 to 12 percent. The soils formed in a veneer of loess or silty alluvium which overlies basalt. Average annual precipitation ranges from 9 to 12 inches. Average January temperature is about 28 degrees F, average July temperature is about 75 degrees F, and average annual temperature is 48 to 53 degrees F. Frost-free period is about 110 to 160 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Chilcott: Strong lead
- Aldape: Strong lead
- Aradaran: Strong lead
- Bowns: Strong lead
- Breadloaf: Strong lead
- Brent: Strong lead
- Castlerock: Strong lead
- Catchell: Strong lead
See it on the map
Open a Kunaton spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Kunaton silty clay loam, 0 to 2 percent slopes, map unit 73 in Ada County, Idaho.
- Official Series Description: Kunaton(revised 05/2001), established.
- Taxonomic class: Clayey, smectitic, mesic, shallow Abruptic Xeric Argidurids
- Rated with rule version 2026-09-28.1; the method is on the About page.