Purdy soil
Wild-clay potential
Strong lead
Strong lead: a clayey layer typically about 9 to 40 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Purdy soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Purdy silt loam (Huntingdon County, Pennsylvania) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 43% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (20.5): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 31 in (79 cm)).
- Note Typically starts within about 9 in (23 cm) of the surface.
- Note Few rock fragments (about 5% by volume).
Layer by layer
- Loamy layerH1 A silt loam layer about 0 to 9 in down: about 27% clay, moderate plasticity when wet, dark grayish brown when moist. Possible
- Clay-rich layerH2best layer A silty clay layer about 9 to 40 in down: about 43% clay, high plasticity when wet, dark gray when moist. Strong lead
- Clay-rich layerH3 A silty clay layer about 40 to 60 in down: about 43% clay, high plasticity when wet, gray when moist. Strong lead
What it looks like raw
The clay-rich layer (H2), 9 to 40 in down in the typical profile: dark gray (N 4/0); firm, sticky, plastic. Raw colour is not fired colour.
About the soil
- Parent material: slackwater clayey alluvium derived from sedimentary rock.
- USDA family mineralogy: mixed.
- USDA family particle-size class: clayey.
- Drainage: poorly drained.
- Rated hydric (wetland) soil; often saturated and protected.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Pennsylvania, in these survey areas: Huntingdon County, Pennsylvania.
By state: wild clay in Pennsylvania.
USDA, distribution and extent: West Virginia, Pennsylvania, Maryland, Tennessee, and Virginia. Primarily MLRA's 127, 128, and 147, but also lesser areas in MLRA's 122, 124, and 125. Based on recent project work, it is anticipated that small remaining areas in MLRA 126 in Pennsylvania will be recorrelated to other series as those soil survey areas are updated. Extent is moderate.
USDA, geographic setting: Purdy soils are on nearly level to gently sloping terraces. They developed in massive silty clay with occasional lenses of coarser material. The climate is humid temperature; mean annual precipitation ranges from 900 to 1400 millimeters and mean annual air temperature ranges from 9 to 13.8 degrees C.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Edom: Strong lead
- Hublersburg: Strong lead
- Opequon: Strong lead
- Brinkerton: Promising
- Ernest: Promising
- Newark: Promising
- Tyler: Promising
- Albrights: Possible
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Purdy silt loam, map unit Pu in Huntingdon County, Pennsylvania.
- Official Series Description: Purdy(revised 04/2025), established.
- Taxonomic class: Fine, mixed, active, mesic Typic Endoaquults
- Rated with rule version 2026-09-28.1; the method is on the About page.