Edom soil
Wild-clay potential
Strong lead
Strong lead: a clayey layer typically about 8 to 38 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Edom soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Edom-Opequon complex, 3 to 8 percent slopes (Huntingdon County, Pennsylvania) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 48% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (34): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 30 in (76 cm)).
- Note Typically starts within about 8 in (20 cm) of the surface.
- Note Few rock fragments (about 13% by volume).
Layer by layer
- Loamy layerH1 A silty clay loam layer about 0 to 8 in down: about 29% clay, high plasticity when wet, dark brown when moist. Promising
- Clay-rich layerH2best layer A silty clay layer about 8 to 38 in down: about 48% clay, high plasticity when wet, reddish brown when moist. Strong lead
- Clay-rich layerH3 A very channery silty clay loam layer about 38 to 46 in down: about 39% clay, high plasticity when wet, reddish brown when moist. Possible
- BedrockH4 Bedrock about 46 to 50 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay-rich layer (H2), 8 to 38 in down in the typical profile: reddish brown (5YR 4/4); firm, sticky, plastic. Raw colour is not fired colour.
About the soil
- Parent material: residuum weathered from limestone and shale.
- USDA family mineralogy: illitic.
- USDA family particle-size class: fine.
- Drainage: well drained.
- Lithic bedrock typically about 46 in (117 cm) down.
Where it is mapped
Seen on the map as the most common soil in 7 map units in Pennsylvania, in these survey areas: Huntingdon County, Pennsylvania.
By state: wild clay in Pennsylvania.
USDA, distribution and extent: Pennsylvania, Maryland, West Virginia, and Virginia. The series is moderately extensive.
USDA, geographic setting: Edom soils are on gently sloping to steep dissected uplands with dominant slopes of 3 to 45 percent. The soils developed in materials weathered from interbedded shaly or platy limestone and calcareous shale. The climate is temperate and humid with mean annual rainfall of 36 to 46 inches, mean annual air temperature of 48 to 56 degrees F., and a growing season of 150 to 210 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Hublersburg: Strong lead
- Opequon: Strong lead
- Purdy: Strong lead
- Brinkerton: Promising
- Ernest: Promising
- Newark: Promising
- Tyler: Promising
- Albrights: Possible
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 60%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Edom-Opequon complex, 3 to 8 percent slopes, map unit EeB in Huntingdon County, Pennsylvania.
- Official Series Description: Edom, established.
- Taxonomic class: Fine, illitic, mesic Typic Hapludalfs
- Rated with rule version 2026-09-28.1; the method is on the About page.