Puckum soil
Wild-clay potential
Weak indication
Weak indication: no layer of Puckum shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Puckum soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Puckum muck, occasionally ponded, 0 to 2 percent slopes, frequently flooded (Kent County, Maryland) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Organic surface layer (peat, muck, or litter), not a clay body.
Layer by layer
- Organic top layerOa1 An organic top layer about 0 to 20 in down, not a clay body. Weak indication
- Organic top layerOa2best layer An organic top layer about 20 to 80 in down, not a clay body. Weak indication
What it looks like raw
The organic top layer (Oa2), 20 to 80 in down in the typical profile: dark brown (7.5YR 3/2). Raw colour is not fired colour.
About the soil
- Parent material: highly decomposed woody organic material.
- USDA family particle-size class: not used.
- Drainage: very poorly drained.
- Rated hydric (wetland) soil; often saturated and protected.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Maryland, in these survey areas: Harford County, Aberdeen Proving Ground, Maryland; Kent County, Maryland.
By state: wild clay in Maryland.
USDA, geographic setting: Landscape: Coastal Plain
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Elkton: Promising
- Kentuck: Promising
- Lenape: Promising
- Nanticoke: Promising
- Mattapex: Possible
- Woodstown: Possible
- Beltsville: Possible
- Codorus: Possible
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Puckum muck, occasionally ponded, 0 to 2 percent slopes, frequently flooded, map unit Pk in Kent County, Maryland.
- Official Series Description: Puckum(revised 11/2002), established.
- Taxonomic class: Dysic, mesic Typic Haplosaprists
- Rated with rule version 2026-09-28.1; the method is on the About page.