Elkton soil
Wild-clay potential
Promising
Promising: a clay-enriched layer typically about 7 to 38 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Elkton soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Elkton silt loam (Harford County Area, Maryland) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 33% clay in the fine-earth portion.
- Note USDA labels this a "Btg1" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (15).
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 31 in (79 cm)).
- Note Typically starts within about 7 in (18 cm) of the surface.
- Note Few rock fragments (about 0% by volume).
Layer by layer
- TopsoilA A silt loam layer about 0 to 2 in down: about 15% clay, low plasticity when wet, dark olive gray when moist. Weak indication
- Sandy layerEg A silt loam layer about 2 to 7 in down: about 14% clay, low plasticity when wet, gray when moist. Weak indication
- Clay subsoilBtg1best layer A silty clay loam layer about 7 to 38 in down: about 33% clay, moderate plasticity when wet, gray when moist. Promising
- Clay subsoilBtg2 A clay loam layer about 38 to 54 in down: about 28% clay, moderate plasticity when wet, gray when moist. Promising
- Loamy layer2CBg A sandy clay loam layer about 54 to 72 in down: about 25% clay, moderate plasticity when wet, gray when moist. Weak indication
What it looks like raw
The clay subsoil (Btg1), 7 to 38 in down in the typical profile: gray (5Y 6/1); silty clay loam; firm; sticky, plastic. Raw colour is not fired colour.
About the soil
- Parent material: silty eolian deposits over loamy fluviomarine deposits.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: poorly drained.
- Rated hydric (wetland) soil; often saturated and protected.
Where it is mapped
Seen on the map as the most common soil in 9 map units in Maryland, Virginia, in these survey areas: Baltimore County, Maryland; Cecil County, Maryland; Charles County, Maryland; Fairfax County, Virginia; Harford County Area, Maryland; Harford County, Aberdeen Proving Ground, Maryland; Prince George's County, Maryland.
By state: wild clay in Maryland,wild clay in Virginia.
USDA, geographic setting: Landscape: Coastal Plain
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Christiana: Strong lead
- Lenni: Strong lead
- Montalto: Strong lead
- Watchung: Strong lead
- Magnolia: Strong lead
- Benevola: Strong lead
- Cumberstone: Strong lead
- Gunston: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Elkton silt loam, map unit En in Harford County Area, Maryland.
- Official Series Description: Elkton(revised 11/2015), established.
- Taxonomic class: Fine-silty, mixed, active, mesic Typic Endoaquults
- Rated with rule version 2026-09-28.1; the method is on the About page.