Lenni soil
Wild-clay potential
Strong lead
Strong lead: a clay-enriched layer typically about 26 to 49 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Lenni soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Lenni and Quindocqua soils, 0 to 2 percent slopes (Charles County, Maryland) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 50% clay in the fine-earth portion.
- Note USDA labels this a "Btg2" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (20): USDA's estimate suggests plastic behavior when wet.
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Thick enough to investigate (about 23 in (58 cm)).
- Note Typically starts about 26 in (66 cm) down; expect real digging or look for cuts and banks.
- Note Few rock fragments (about 0% by volume).
Layer by layer
- TopsoilA A silt loam layer about 0 to 6 in down: about 15% clay, low plasticity when wet, very dark grayish brown when moist. Weak indication
- Sandy layerEg A silt loam layer about 6 to 9 in down: about 14% clay, low plasticity when wet, light gray when moist. Weak indication
- Clay subsoilBtg1 A silty clay loam layer about 9 to 26 in down: about 36% clay, moderate plasticity when wet, light brownish gray when moist. Promising
- Clay subsoilBtg2best layer A clay layer about 26 to 49 in down: about 50% clay, high plasticity when wet, grayish brown when moist. Strong lead
- Sandy layer2Cg A loamy sand layer about 49 to 54 in down: about 10% clay, low plasticity when wet, light gray when moist. Weak indication
What it looks like raw
The clay subsoil (Btg2), 26 to 49 in down in the typical profile: grayish brown (2.5Y 5/2); clay; firm; slightly sticky; slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: clayey fluviomarine deposits.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine.
- Drainage: poorly drained.
- Rated hydric (wetland) soil; often saturated and protected.
Where it is mapped
Seen on the map as the most common soil in 4 map units in Maryland, in these survey areas: Cecil County, Maryland; Charles County, Maryland; Prince George's County, Maryland.
By state: wild clay in Maryland.
USDA, distribution and extent: Distribution: Coastal Plain of Delaware, Maryland, and New Jersey
USDA, geographic setting: Landscape: Coastal plain upland
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Christiana: Strong lead
- Magnolia: Strong lead
- Howell: Strong lead
- Montalto: Strong lead
- Watchung: Strong lead
- Elkton: Promising
- Nanticoke: Promising
- Aquasco: Promising
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 50%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Lenni and Quindocqua soils, 0 to 2 percent slopes, map unit LQA in Charles County, Maryland.
- Official Series Description: Lenni(revised 06/2006), established.
- Taxonomic class: Fine, mixed, active, mesic Typic Endoaquults
- Rated with rule version 2026-09-28.1; the method is on the About page.