Poulsbo soil
Wild-clay potential
Weak indication
Weak indication: no layer of Poulsbo shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Poulsbo soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Poulsbo spot on the map
Rated from the USDA soil survey record for Poulsbo gravelly sandy loam, 0 to 6 percent slopes (Kitsap County Area, Washington) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 8% clay.
- Lowers the potential Low engineering plasticity index (2.5): little plastic behavior expected when wet.
- Note Thick enough to investigate (about 36 in (91 cm)).
- Note Typically starts about 24 in (61 cm) down; expect real digging or look for cuts and banks.
- Lowers the potential High rock content (about 43% by volume) lowers its practical promise; the clay percentage applies only to the fine earth between the rocks.
Layer by layer
- Sandy layerH1 A gravelly ashy sandy loam layer about 0 to 2 in down: about 11% clay, low plasticity when wet. Weak indication
- Sandy layerH2 A gravelly ashy sandy loam layer about 2 to 24 in down: about 11% clay, low plasticity when wet, dark yellowish brown when moist. Weak indication
- Sandy layerH3best layer A very gravelly sandy loam layer about 24 to 60 in down: about 8% clay, low plasticity when wet, olive when moist. Weak indication
What it looks like raw
The sandy layer (H3), 24 to 60 in down in the typical profile: olive (5Y 5/3), light gray (5Y 7/2) dry. Raw colour is not fired colour.
About the soil
- Parent material: basal till with volcanic ash in the upper part.
- USDA family particle-size class: coarse-loamy.
- Drainage: moderately well drained.
Where it is mapped
Seen on the map as the most common soil in 13 map units in Washington, in these survey areas: Bangor Naval Station, Washington; Kitsap County Area, Washington.
By state: wild clay in Washington.
USDA, distribution and extent: Northwestern Washington. Poulsbo series is of small extent.
USDA, geographic setting: Poulsbo soils are on uplands at elevations from near sea level to 450 feet. They formed in sandy glacial till. Slopes are 0 to 30 percent. The climate is cool and dry in the summer and mild and wet in the winter. The annual precipitation ranges from 30 to 40 inches; the mean annual temperature is about 51 degrees F.; and the frost free season is about 210 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Bellingham: Strong lead
- McKenna: Promising
- Shalcar: Promising
- Kitsap: Possible
- Alderwood: Weak indication
- Belfast: Weak indication
- Harstine: Weak indication
- Indianola: Weak indication
See it on the map
Open a Poulsbo spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 95%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Poulsbo gravelly sandy loam, 0 to 6 percent slopes, map unit 39 in Kitsap County Area, Washington.
- Official Series Description: Poulsbo(revised 01/2000), established.
- Taxonomic class: Coarse-loamy, isotic, mesic Vitrandic Dystroxerepts
- Rated with rule version 2026-09-28.1; the method is on the About page.