Nisula soil
Wild-clay potential
Promising
Promising: a clay-enriched layer typically about 25 to 51 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Nisula soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Nisula loam, 2 to 4 percent slopes (Valley Area, Idaho, Parts of Adams and Valley Counties) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 33% clay in the fine-earth portion.
- Note USDA labels this a "Bt1" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (23): USDA's estimate suggests plastic behavior when wet.
- Note Thick enough to investigate (about 26 in (66 cm)).
- Note Typically starts about 25 in (64 cm) down; expect real digging or look for cuts and banks.
- Note Few rock fragments (about 6% by volume).
Layer by layer
- TopsoilAB A loam layer about 0 to 25 in down: about 22% clay, moderate plasticity when wet, brown when moist. Possible
- Clay subsoilBt1best layer A clay loam layer about 25 to 51 in down: about 33% clay, high plasticity when wet, yellowish brown when moist. Promising
- Clay subsoilBt2 A sandy clay loam layer about 51 to 60 in down: about 28% clay, moderate plasticity when wet, light yellowish brown when moist. Possible
What it looks like raw
The clay subsoil (Bt1), 25 to 51 in down in the typical profile: yellowish brown (10YR 5/4); clay loam. Raw colour is not fired colour.
About the soil
- Parent material: alluvium derived from granite and/or basalt.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 4 map units in Idaho, in these survey areas: Valley Area, Idaho, Parts of Adams and Valley Counties.
By state: wild clay in Idaho.
USDA, distribution and extent: In the colder areas of the Idaho Batholith bordering the valley floors. The soil is inextensive.
USDA, geographic setting: Nisula soils are on alluvial fans and footslopes. Slopes are 2 to 60 percent. The soils formed in mixed alluvial material from basaltic and granitic sources. Elevations are 4,800 to 5,300 feet. The climate is humid continental, cool summer (Trewartha's modified Koppen System) with cold, wet winters. Mean annual precipitation is 24 to 27 inches and includes 8 to 11 feet of snowfall. Mean annual temperature is 39 degrees to 43 degrees F. Frost-free season is about 60 to 75 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Cabarton: Strong lead
- Blackwell: Promising
- Swede: Promising
- Archabal: Possible
- Tica: Possible
- Bluebell: Weak indication
- Bryan: Weak indication
- Demast: Weak indication
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Nisula loam, 2 to 4 percent slopes, map unit 36 in Valley Area, Idaho, Parts of Adams and Valley Counties.
- Official Series Description: Nisula(revised 08/2002), established.
- Taxonomic class: Fine-loamy, mixed, active Umbric Haplocryalfs
- Rated with rule version 2026-09-28.1; the method is on the About page.