Mukilteo soil
Wild-clay potential
Weak indication
Weak indication: no layer of Mukilteo shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Mukilteo soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Mukilteo spot on the map
Rated from the USDA soil survey record for Mukilteo peat (Kitsap County Area, Washington) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Organic surface layer (peat, muck, or litter), not a clay body.
Layer by layer
- Organic top layerOi An organic top layer about 0 to 6 in down, not a clay body. Weak indication
- Organic top layerOi2best layer An organic top layer about 6 to 60 in down, not a clay body. Weak indication
What it looks like raw
The organic top layer (Oi2), 6 to 60 in down in the typical profile: dark reddish brown (5YR 3/2) moist; friable. Raw colour is not fired colour.
About the soil
- Parent material: herbaceous organic material.
- Drainage: very poorly drained.
- Rated hydric (wetland) soil; often saturated and protected.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Washington, in these survey areas: Kitsap County Area, Washington.
By state: wild clay in Washington.
USDA, distribution and extent: This series is of moderate extent in the Puget Sound Basin of western Washington.
USDA, geographic setting: Elevation--0 to 305 m
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Bellingham: Strong lead
- McKenna: Promising
- Shalcar: Promising
- Kitsap: Possible
- Alderwood: Weak indication
- Belfast: Weak indication
- Harstine: Weak indication
- Indianola: Weak indication
See it on the map
Open a Mukilteo spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Mukilteo peat, map unit 33 in Kitsap County Area, Washington.
- Official Series Description: Mukilteo(revised 10/2018), established.
- Taxonomic class: Dysic, mesic Typic Haplohemists
- Rated with rule version 2026-09-28.1; the method is on the About page.