Labish soil
Wild-clay potential
Strong lead
Strong lead: a clayey layer typically about 3 to 60 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Labish soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Labish silty clay loam (Marion County Area, Oregon) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 48% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (25): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil very sticky and very plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 57 in (144 cm)).
- Note Typically starts within about 3 in (8 cm) of the surface.
- Missing data Rock fragment content is not reported.
- Note High shrink-swell (linear extensibility about 7.5%): often very plastic, and prone to cracking as it dries.
Layer by layer
- Clay-rich layerH1 A silty clay loam layer about 0 to 3 in down: about 37% clay, high plasticity when wet, black when moist. Promising
- Clay-rich layerH2best layer A clay layer about 3 to 60 in down: about 48% clay, high plasticity when wet, very dark gray when moist. Strong lead
What it looks like raw
The clay-rich layer (H2), 3 to 60 in down in the typical profile: very dark gray (N 3/); extremely hard, very firm, very sticky and very plastic. Raw colour is not fired colour.
About the soil
- Parent material: mixed mineral and organic material.
- USDA family particle-size class: fine.
- Drainage: poorly drained.
- Rated hydric (wetland) soil; often saturated and protected.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Oregon, in these survey areas: Marion County Area, Oregon.
By state: wild clay in Oregon.
USDA, distribution and extent: Willamette Valley and tributary valleys of central western Oregon. The series is inextensive.
USDA, geographic setting: The Labish soils are on level bottomlands or basins with impeded drainage. Elevations range from 100 to 200 feet. Slope gradients range from 0 to 1 percent. The soils formed in mixed alluvial or lacustrine material high in organic matter and stratified with thin lenses less than 4 inches thick of peat or much and ranging to thicker peat deposits below 36 inches. The climate is humid temperate. The mean annual precipitation is 40 to 50 inches. The mean annual temperature is 53 degrees F.; the average January temperature is 39 degrees F.; and the average July temperature is 67 degrees F. The frost-free season is 165 to 210 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Bashaw: Strong lead
- Concord: Strong lead
- Dayton: Strong lead
- Holcomb: Strong lead
- McBee: Strong lead
- Amity: Promising
- Chehalis: Promising
- Wapato: Promising
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Labish silty clay loam, map unit La in Marion County Area, Oregon.
- Official Series Description: Labish, established.
- Taxonomic class: Fine, smectitic, acid, mesic Cumulic Humaquepts
- Rated with rule version 2026-09-28.1; the method is on the About page.