Amity soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 24 to 37 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Amity soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Amity silt loam (Marion County Area, Oregon) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 31% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (17.5).
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 13 in (33 cm)).
- Note Typically starts about 24 in (61 cm) down; expect real digging or look for cuts and banks.
- Missing data Rock fragment content is not reported.
Layer by layer
- Loamy layerH1 A silt loam layer about 0 to 24 in down: about 20% clay, moderate plasticity when wet, very dark grayish brown when moist. Possible
- Loamy layerH2best layer A silty clay loam layer about 24 to 37 in down: about 31% clay, moderate plasticity when wet, light olive brown when moist. Promising
- Sandy layerH3 A silt loam layer about 37 to 60 in down: about 18% clay, moderate plasticity when wet, olive brown when moist. Weak indication
What it looks like raw
The loamy layer (H2), 24 to 37 in down in the typical profile: light olive brown (2.5Y 5/4), very pale brown (10YR 7/4) dry; very hard, firm, moderately sticky and moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: mixed silty alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-silty.
- Drainage: somewhat poorly drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Oregon, in these survey areas: Marion County Area, Oregon.
By state: wild clay in Oregon.
USDA, distribution and extent: Amity soils are located throughout the Willamette Valley of western Oregon; MLRA 2. They are extensive.
USDA, geographic setting: The Amity soils are on broad terraces at elevations of 150 to 400 feet. Slopes range from 0 to 3 percent. The soils formed in indistinctly stratified silty alluvium and lacustrine silts of upper Pleistocene age. Beginning at the surface of the mineral soil, the depositional stratigraphy of the Amity soil profile developed in the following Willamette Formation Members: (1) Greenback Member, and (2) Irish Bend Member. Summers are warm and dry and winters are cool and moist. The average annual precipitation is 40 to 50 inches. The average January temperature is 39 to 40 degrees F. and average July temperature is 65 to 67 degrees F. The average annual temperature is 50 to 54 degrees F. The...
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Bashaw: Strong lead
- Concord: Strong lead
- Dayton: Strong lead
- Holcomb: Strong lead
- Labish: Strong lead
- McBee: Strong lead
- Chehalis: Promising
- Wapato: Promising
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Amity silt loam, map unit Am in Marion County Area, Oregon.
- Official Series Description: Amity(revised 01/2009), established.
- Taxonomic class: Fine-silty, mixed, superactive, mesic Argiaquic Xeric Argialbolls
- Rated with rule version 2026-09-28.1; the method is on the About page.