Keyport soil
Wild-clay potential
Promising
Promising: a clay-enriched layer typically about 10 to 48 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Keyport soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Keyport spot on the map
Rated from the USDA soil survey record for Keyport fine sandy loam, 0 to 8 percent slopes (District of Columbia) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 38% clay in the fine-earth portion.
- Note USDA labels this a "Bt" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (10).
- Note Thick enough to investigate (about 38 in (97 cm)).
- Note Typically starts within about 10 in (25 cm) of the surface.
- Missing data Rock fragment content is not reported.
- Missing data Held at "Promising" because no plasticity evidence is available; a high clay percentage alone does not make a strong lead.
Layer by layer
- TopsoilAp A fine sandy loam layer about 0 to 10 in down: about 13% clay, moderate plasticity when wet, brown when moist. Weak indication
- Clay subsoilBtbest layer A silty clay loam layer about 10 to 48 in down: about 38% clay, moderate plasticity when wet, yellowish brown when moist. Promising
- Sandy layer2Cg A stratified silt loam to sandy loam layer about 48 to 80 in down: about 12% clay, moderate plasticity when wet, dark gray when moist. Weak indication
What it looks like raw
The clay subsoil (Bt), 10 to 48 in down in the typical profile: yellowish brown (10YR 5/4). Raw colour is not fired colour.
About the soil
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine.
- Drainage: moderately well drained.
Where it is mapped
Seen on the map as the most common soil in 13 map units in District of Columbia, Maryland, in these survey areas: Baltimore County, Maryland; Cecil County, Maryland; District of Columbia; Harford County Area, Maryland.
By state: wild clay in District of Columbia,wild clay in Maryland.
USDA, distribution and extent: Keyport soils are of moderate extent, more than 70,000 acres, in New Jersey, Delaware, and Maryland.
USDA, geographic setting: Landscape: Coastal plain
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Christiana: Strong lead
- Montalto: Strong lead
- Watchung: Strong lead
- Benevola: Strong lead
- Cumberstone: Strong lead
- Dunning: Strong lead
- Jackland: Strong lead
- Kelly: Strong lead
See it on the map
Open a Keyport spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 100%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Keyport fine sandy loam, 0 to 8 percent slopes, map unit KeB in District of Columbia.
- Official Series Description: Keyport(revised 12/2014), established.
- Taxonomic class: Fine, mixed, semiactive, mesic Aquic Hapludults
- Rated with rule version 2026-09-28.1; the method is on the About page.