Houstake soil
Wild-clay potential
Weak indication
Weak indication: no layer of Houstake shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Houstake soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Houstake spot on the map
Rated from the USDA soil survey record for Houstake sandy loam, 0 to 3 percent slopes (Upper Deschutes River Area, Oregon, Parts of Deschutes, Jefferson, and Klamath Counties) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 10% clay.
- Lowers the potential Low engineering plasticity index (2.5): little plastic behavior expected when wet.
- Note Thick enough to investigate (about 38 in (96 cm)).
- Note Typically starts within about 22 in (56 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Sandy layerH1 A sandy loam layer about 0 to 5 in down: about 10% clay, low plasticity when wet, grayish brown when moist. Weak indication
- Sandy layerH2 A sandy loam layer about 5 to 17 in down: about 10% clay, low plasticity when wet, grayish brown when moist. Weak indication
- Sandy layerH3 A sandy loam layer about 17 to 22 in down: about 15% clay, low plasticity when wet, grayish brown when moist. Weak indication
- Sandy layerH4best layer A sandy loam layer about 22 to 60 in down: about 10% clay, low plasticity when wet, light brownish gray when moist. Weak indication
What it looks like raw
The sandy layer (H4), 22 to 60 in down in the typical profile: light brownish gray (10YR 6/2); very hard, firm and brittle. Raw colour is not fired colour.
About the soil
- Parent material: volcanic ash over alluvium derived from basalt.
- USDA family mineralogy: mixed.
- USDA family particle-size class: coarse-loamy.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Oregon, in these survey areas: Upper Deschutes River Area, Oregon, Parts of Deschutes, Jefferson, and Klamath Counties.
By state: wild clay in Oregon.
USDA, distribution and extent: Central Oregon east of the Cascade Mountains; MLRA 10, pumice zone. The soils are moderate in extent.
USDA, geographic setting: Houstake soils are in shallow depressions and drainages on lava plains. Elevations are 2,500 to 4,000 feet. Slopes are 0 to 8 percent. The soils formed in alluvium containing ash and material weathered from lava rocks. The mean annual precipitation is 8 to 12 inches. The average January temperature is 30 to 32 degrees F, the average July temperature is 63 to 66 degrees F, and the mean annual temperature is 47 to 52 degrees F. The frost-free period is 70 to 100 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Moonbeam: Strong lead
- Swalesilver: Strong lead
- Ninemile: Promising
- Reluctan: Promising
- Goodtack: Possible
- Hackleman: Possible
- Vergas: Possible
- Bluesters: Weak indication
See it on the map
Open a Houstake spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Houstake sandy loam, 0 to 3 percent slopes, map unit 65A in Upper Deschutes River Area, Oregon, Parts of Deschutes, Jefferson, and Klamath Counties.
- Official Series Description: Houstake, established.
- Taxonomic class: Coarse-loamy, mixed, superactive, mesic Vitritorrandic Haploxerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.