Cloquato soil
Wild-clay potential
Weak indication
Weak indication: no layer of Cloquato shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Cloquato soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Cloquato spot on the map
Rated from the USDA soil survey record for Cloquato silt loam (Polk County, Oregon) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 10% clay.
- Lowers the potential Low engineering plasticity index (2.5): little plastic behavior expected when wet.
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Thick enough to investigate (about 34 in (86 cm)).
- Note Typically starts within about 0 in (0 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Sandy layerH1best layer A silt loam layer about 0 to 34 in down: about 10% clay, low plasticity when wet, very dark grayish brown when moist. Weak indication
- Sandy layerH2 A stratified sand to silt loam layer about 34 to 45 in down: about 6% clay, low plasticity when wet, dark grayish brown when moist. Weak indication
- Sandy layerH3 A stratified sand to silt loam layer about 45 to 60 in down: about 6% clay, low plasticity when wet, light brownish gray when moist. Weak indication
What it looks like raw
The sandy layer (H1), 0 to 34 in down in the typical profile: very dark grayish brown (10YR 3/2), dark grayish brown (10YR 4/2) dry; slightly hard, very friable, slightly sticky and slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: recent alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: coarse-silty.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 3 map units in Oregon, in these survey areas: Marion County Area, Oregon; Polk County, Oregon; Yamhill County, Oregon.
By state: wild clay in Oregon.
USDA, distribution and extent: Western Washington and northwestern Oregon; MLRA 2. The series is of moderate extent.
USDA, geographic setting: These soils are on flood plains at elevations of 30 to 800 feet. Slopes are 0 to 5 percent. These soils formed in mixed alluvium. Cloquato soils occur in a climate characterized by relatively cool dry summers and cool wet winters. Average annual precipitation is 38 to 70 inches. Average January temperature is 30 to 40 degrees F., average July temperature is 65 to 67 degrees F., and mean annual temperature is 50 to 54 degrees F. The growing season (28F) ranges from 150 to 240 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- McBee: Strong lead
- Bashaw: Strong lead
- Concord: Strong lead
- Dayton: Strong lead
- Holcomb: Strong lead
- Labish: Strong lead
- Wapato: Promising
- Chehalis: Promising
See it on the map
Open a Cloquato spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Cloquato silt loam, map unit 17 in Polk County, Oregon.
- Official Series Description: Cloquato(revised 07/2006), established.
- Taxonomic class: Coarse-silty, mixed, superactive, mesic Cumulic Ultic Haploxerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.