Chrome soil
Wild-clay potential
Promising
Promising: a clayey layer typically about 7 to 15 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Chrome soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Chrome channery silty clay loam, 15 to 45 percent slopes (Harford County Area, Maryland) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 37% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (32.5): USDA's estimate suggests plastic behavior when wet.
- Raises the potential The official series description calls the wet soil moderately sticky and very plastic (a field observation, not a ceramic test).
- Note Moderate thickness (about 8 in (20 cm)).
- Note Typically starts within about 7 in (18 cm) of the surface.
- Lowers the potential Noticeable rock fragments (about 25% by volume); screening would be needed and the clay percentage applies to the fine earth only.
Layer by layer
- Loamy layerH1 A gravelly silty clay loam layer about 0 to 7 in down: about 28% clay, moderate plasticity when wet, dark olive brown when moist. Possible
- Clay-rich layerH2best layer A gravelly clay loam layer about 7 to 15 in down: about 37% clay, high plasticity when wet, dark yellowish brown when moist. Promising
- Loamy layerH3 A very gravelly clay loam layer about 15 to 30 in down: about 33% clay, high plasticity when wet, dark yellowish brown when moist. Weak indication
- BedrockH4 Weathered bedrock about 30 to 34 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay-rich layer (H2), 7 to 15 in down in the typical profile: dark yellowish brown (10YR 4/4); friable, moderately sticky, very plastic. Raw colour is not fired colour.
About the soil
- Parent material: silty and clayey residuum weathered from serpentinite.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine.
- Drainage: well drained.
- Lithic bedrock typically about 30 in (76 cm) down.
Where it is mapped
Seen on the map as the most common soil in 14 map units in Maryland, Pennsylvania, in these survey areas: Cecil County, Maryland; Chester County, Pennsylvania; Delaware County, Pennsylvania; Harford County Area, Maryland.
By state: wild clay in Maryland,wild clay in Pennsylvania.
USDA, distribution and extent: Maryland and Pennsylvania. The series is of small extent.
USDA, geographic setting: Chrome soils are on nearly level to steep convex uplands of the Northern Piedmont. Slopes range from 0 to 45 percent. They formed in residuum weathered from serpentine, or from other basic rocks high in magnesium. Climate is humid and temperate with mean annual precipitation of 38 to 46 inches; mean annual temperature ranges from 45 to 55 degrees F. The frost-free season ranges from 170 to 200 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Watchung: Strong lead
- Montalto: Strong lead
- Christiana: Strong lead
- Kelly: Strong lead
- Kinkora: Strong lead
- Lenni: Strong lead
- Talleyville: Strong lead
- Baile: Promising
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 100%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Chrome channery silty clay loam, 15 to 45 percent slopes, map unit CrE in Harford County Area, Maryland.
- Official Series Description: Chrome(revised 10/2008), established.
- Taxonomic class: Fine, mixed, superactive, mesic Typic Hapludalfs
- Rated with rule version 2026-09-28.1; the method is on the About page.