Chicone soil
Wild-clay potential
Weak indication
Weak indication: no layer of Chicone shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Chicone soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Chicone spot on the map
Rated from the USDA soil survey record for Chicone silt loam (Harford County, Aberdeen Proving Ground, Maryland) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Organic surface layer (peat, muck, or litter), not a clay body.
Layer by layer
- Sandy layerH1 A mucky silt loam layer about 0 to 3 in down: about 12% clay, low plasticity when wet, very dark brown when moist. Weak indication
- Sandy layerH2 A silt loam layer about 3 to 15 in down: about 12% clay, low plasticity when wet, dark brown when moist. Weak indication
- Sandy layerH3 A silt loam layer about 15 to 24 in down: about 13% clay, low plasticity when wet, black when moist. Weak indication
- Organic top layerOabest layer An organic top layer about 24 to 65 in down, not a clay body. Weak indication
- Sandy layerH5 A loamy sand layer about 65 to 72 in down: about 6% clay, low plasticity when wet, gray when moist. Weak indication
What it looks like raw
The organic top layer (Oa), 24 to 65 in down in the typical profile: black (10YR 2/1); muck, sapric soil material. Raw colour is not fired colour.
About the soil
- USDA family mineralogy: mixed.
- USDA family particle-size class: coarse-silty.
- Drainage: very poorly drained.
- Rated hydric (wetland) soil; often saturated and protected.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Maryland, New Jersey, in these survey areas: Harford County, Aberdeen Proving Ground, Maryland; Salem County, New Jersey.
By state: wild clay in Maryland,wild clay in New Jersey.
USDA, geographic setting: Landscape: Coastal Plain
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Elkton: Promising
- Kentuck: Promising
- Lenape: Promising
- Mattapex: Possible
- Othello: Possible
- Woodstown: Possible
- Adelphia: Possible
- Beltsville: Possible
See it on the map
Open a Chicone spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Chicone silt loam, map unit Ch in Harford County, Aberdeen Proving Ground, Maryland.
- Official Series Description: Chicone(revised 11/2015), established.
- Taxonomic class: Coarse-silty, mixed, active, acid, mesic Thapto-histic Fluvaquents
- Rated with rule version 2026-09-28.1; the method is on the About page.