Biscoe soil
Wild-clay potential
Promising
Promising: a clay-enriched layer typically about 8 to 21 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Biscoe soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Biscoe-Secrest complex, 2 to 6 percent slopes (Montgomery County, North Carolina) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 30% clay in the fine-earth portion.
- Note USDA labels this a "Bt" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (16.5).
- Raises the potential The official series description calls the wet soil slightly sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 13 in (33 cm)).
- Note Typically starts within about 8 in (20 cm) of the surface.
- Note Few rock fragments (about 6% by volume).
Layer by layer
- TopsoilAp A silt loam layer about 0 to 3 in down: about 12% clay, low plasticity when wet, black when moist. Weak indication
- Loamy layerBE A silty clay loam layer about 3 to 8 in down: about 29% clay, moderate plasticity when wet, pale yellow when moist. Possible
- Clay subsoilBtbest layer A silty clay loam layer about 8 to 21 in down: about 30% clay, moderate plasticity when wet, light yellowish brown when moist. Promising
- Clay subsoilBtg A silty clay layer about 21 to 23 in down: about 42% clay, moderate plasticity when wet, light brownish gray when moist. Promising
- BedrockCr Weathered bedrock about 23 to 41 in down: no clay layer to dig. Weak indication
- BedrockR Unweathered bedrock about 41 to 80 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay subsoil (Bt), 8 to 21 in down in the typical profile: light yellowish brown (2.5Y 6/3); silty clay loam; friable; slightly sticky, moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: residuum weathered from metavolcanics and/or argillite.
- USDA family mineralogy: siliceous.
- USDA family particle-size class: fine-silty.
- Drainage: somewhat poorly drained.
- Paralithic bedrock typically about 23 in (58 cm) down.
Where it is mapped
Seen on the map as the most common soil in 2 map units in North Carolina, in these survey areas: Montgomery County, North Carolina.
By state: wild clay in North Carolina.
USDA, distribution and extent: Distribution: North Carolina and possibly South Carolina
USDA, geographic setting: Elevation (type location): 90 to 245 meters (about 300 to 800 feet)
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Badin: Strong lead
- Herndon: Strong lead
- Wynott: Strong lead
- Georgeville: Promising
- Shellbluff: Promising
- State: Promising
- Tillery: Promising
- Chenneby: Possible
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 35%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Biscoe-Secrest complex, 2 to 6 percent slopes, map unit BsB in Montgomery County, North Carolina.
- Official Series Description: Biscoe(revised 03/2026), established.
- Taxonomic class: Fine-silty, siliceous, subactive, thermic Aeric Epiaquults
- Rated with rule version 2026-09-28.1; the method is on the About page.