Badin soil
Wild-clay potential
Strong lead
Strong lead: a clay-enriched layer typically about 6 to 35 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Badin soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Badin channery silt loam, 2 to 8 percent slopes (Davidson County, North Carolina) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 45% clay in the fine-earth portion.
- Note USDA labels this a "Bt" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (32): USDA's estimate suggests plastic behavior when wet.
- Note Thick enough to investigate (about 29 in (74 cm)).
- Note Typically starts within about 6 in (15 cm) of the surface.
- Note Few rock fragments (about 14% by volume).
- Note Engineering class CH: a clay of high plasticity in the Unified system.
Layer by layer
- TopsoilA A channery silt loam layer about 0 to 6 in down: about 18% clay, moderate plasticity when wet, brown when moist. Weak indication
- Clay subsoilBtbest layer A silty clay layer about 6 to 35 in down: about 45% clay, high plasticity when wet, yellowish red when moist. Strong lead
- BedrockCr Bedrock about 35 to 43 in down: no clay layer to dig. Weak indication
- BedrockR Bedrock about 43 to 53 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay subsoil (Bt), 6 to 35 in down in the typical profile: yellowish red (5YR 5/8); friable. Raw colour is not fired colour.
About the soil
- Parent material: residuum weathered from metasedimentary rock and/or metavolcanics.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine.
- Drainage: well drained.
- Paralithic bedrock typically about 35 in (89 cm) down.
Where it is mapped
Seen on the map as the most common soil in 14 map units in North Carolina, in these survey areas: Davidson County, North Carolina; Montgomery County, North Carolina; Randolph County, North Carolina.
By state: wild clay in North Carolina.
USDA, distribution and extent: Piedmont Plateau of North Carolina and Virginia. The series is of moderate extent.
USDA, geographic setting: Badin soils are on gently sloping to steep uplands in the Piedmont. Slope gradients are commonly 4 to 25 percent, but range from 2 to 55 percent slopes. They formed in residuum weathered from fine-grained metasedimentary rocks such as argillites. Mean annual precipitation is 47 inches and mean annual air temperature is 60 degrees F. near the type location.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Appling: Strong lead
- Cecil: Strong lead
- Davidson: Strong lead
- Mecklenburg: Strong lead
- Pacolet: Strong lead
- Vance: Strong lead
- Wynott: Strong lead
- Armenia: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Badin channery silt loam, 2 to 8 percent slopes, map unit BaB in Davidson County, North Carolina.
- Official Series Description: Badin(revised 02/2010), established.
- Taxonomic class: Fine, mixed, semiactive, thermic Typic Hapludults
- Rated with rule version 2026-09-28.1; the method is on the About page.