Birdsboro soil
Wild-clay potential
Possible
Possible: a clay-enriched layer typically about 9 to 49 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Birdsboro soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Birdsboro spot on the map
Rated from the USDA soil survey record for Birdsboro silt loam, 0 to 3 percent slopes (Montgomery County, Pennsylvania) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 24% clay. It may need settling or refining to become a clay body.
- Note USDA labels this a "Bt" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (16).
- Raises the potential The official series description calls the wet soil slightly sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 40 in (101 cm)).
- Note Typically starts within about 9 in (23 cm) of the surface.
- Note Few rock fragments (about 14% by volume).
Layer by layer
- TopsoilAp A silt loam layer about 0 to 9 in down: about 19% clay, moderate plasticity when wet, dark brown when moist. Possible
- Clay subsoilBtbest layer A silt loam layer about 9 to 49 in down: about 24% clay, moderate plasticity when wet, reddish brown when moist. Possible
- Sandy layerC A very gravelly sandy loam layer about 49 to 73 in down: about 18% clay, moderate plasticity when wet, reddish brown when moist. Weak indication
What it looks like raw
The clay subsoil (Bt), 9 to 49 in down in the typical profile: reddish brown (5YR 4/3); firm, slightly sticky, plastic. Raw colour is not fired colour.
About the soil
- Parent material: old reddish alluvium derived from sedimentary rock.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
- Lithic bedrock typically about 85 in (217 cm) down.
Where it is mapped
Seen on the map as the most common soil in 5 map units in Pennsylvania, in these survey areas: Berks County, Pennsylvania; Lehigh County, Pennsylvania; Montgomery County, Pennsylvania.
By state: wild clay in Pennsylvania.
USDA, distribution and extent: Pennsylvania, New Jersey, Maryland, and Virginia. The series is of moderate extent.
USDA, geographic setting: Birdsboro soils are on nearly level to sloping stream terraces and alluvial fans. Slopes range from 0 to 15 percent. They formed in old alluvial deposits derived from red sandstone, shale and siltstone. Climate is humid and temperate; mean annual precipitation ranges from 38 to 46 inches; average annual temperature ranges from 47 to 59 degrees F.; the growing season ranges from 140 to 200 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Hagerstown: Strong lead
- Watchung: Strong lead
- Bowmansville: Promising
- Croton: Promising
- Duffield: Promising
- Mount Lucas: Promising
- Readington: Promising
- Towhee: Promising
See it on the map
Open a Birdsboro spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 97%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Birdsboro silt loam, 0 to 3 percent slopes, map unit BnA in Montgomery County, Pennsylvania.
- Official Series Description: Birdsboro(revised 09/2008), established.
- Taxonomic class: Fine-loamy, mixed, active, mesic Oxyaquic Hapludults
- Rated with rule version 2026-09-28.1; the method is on the About page.