Twilight soil
Wild-clay potential
Weak indication
Weak indication: no layer of Twilight shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Twilight soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Twilight spot on the map
Rated from the USDA soil survey record for Twilight-Assinniboine fine sandy loams, 3 to 9 percent slopes (Butte County, South Dakota) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Bedrock or unweathered rock, not a soil layer to dig for clay.
Layer by layer
- Sandy layerH1 A fine sandy loam layer about 0 to 4 in down: about 18% clay, low plasticity when wet, brown when moist. Weak indication
- Sandy layerH2 A fine sandy loam layer about 4 to 16 in down: about 14% clay, low plasticity when wet, light brownish gray when moist. Weak indication
- Sandy layerH3 A fine sandy loam layer about 16 to 28 in down: about 13% clay, low plasticity when wet, light gray when moist. Weak indication
- BedrockCrbest layer Weathered bedrock about 28 to 60 in down: no clay layer to dig. Weak indication
What it looks like raw
The bedrock (Cr), 28 to 60 in down in the typical profile: white (2.5Y 8/1), light brownish gray (2.5Y 6/2) moist. Raw colour is not fired colour.
About the soil
- Parent material: residuum weathered from sandstone.
- USDA family mineralogy: mixed.
- USDA family particle-size class: coarse-loamy.
- Drainage: well drained.
- Paralithic bedrock typically about 30 in (77 cm) down.
Where it is mapped
Seen on the map as the most common soil in 3 map units in South Dakota, in these survey areas: Butte County, South Dakota; Meade County, South Dakota, Northern Part.
By state: wild clay in South Dakota.
USDA, distribution and extent: Northwestern South Dakota and eastern Montana and possibly southwestern North Dakota. The soil is of moderate extent.
USDA, geographic setting: Twilight soils are on gently sloping to hilly upland hills and ridges. Surfaces are plane to convex. Slope gradients range from 2 to 45 percent. The Twilight soils formed in alluvium or eolian over residuum, or residuum weathered from soft sandstone bedrock. Mean annual air temperature ranges from 40 to 45 degrees F, and mean annual precipitation from 10 to 16 inches. Growing season is about 95 to 130 days; average growing season precipitation ranges from 10 to 12 inches; and growing degree days are about 2500 to 2800.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Absher: Strong lead
- Hisle: Strong lead
- Kyle: Strong lead
- Pierre: Strong lead
- Stetter: Strong lead
- Swanboy: Strong lead
- Winler: Strong lead
- Abor: Strong lead
See it on the map
Open a Twilight spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 40%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Twilight-Assinniboine fine sandy loams, 3 to 9 percent slopes, map unit TgC in Butte County, South Dakota.
- Official Series Description: Twilight(revised 04/2002), established.
- Taxonomic class: Coarse-loamy, mixed, superactive, frigid Haplocalcidic Haplustepts
- Rated with rule version 2026-09-28.1; the method is on the About page.