Triton soil
Wild-clay potential
Weak indication
Weak indication: no layer of Triton shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Triton soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Triton very gravelly loam, 0 to 30 percent slopes (Jefferson County Area, Washington) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 8% clay.
- Lowers the potential Low engineering plasticity index (2.5): little plastic behavior expected when wet.
- Note Thick enough to investigate (about 43 in (109 cm)).
- Note Typically starts within about 17 in (43 cm) of the surface.
- Lowers the potential High rock content (about 42% by volume) lowers its practical promise; the clay percentage applies only to the fine earth between the rocks.
Layer by layer
- Sandy layerH1 A very gravelly loam layer about 0 to 13 in down: about 10% clay, low plasticity when wet, dark red when moist. Weak indication
- Sandy layerH2 An extremely gravelly sandy loam layer about 13 to 17 in down: about 10% clay, low plasticity when wet, dark brown when moist. Weak indication
- Sandy layerH3best layer A very gravelly sandy loam layer about 17 to 60 in down: about 8% clay, low plasticity when wet, grayish brown when moist. Weak indication
What it looks like raw
The sandy layer (H3), 17 to 60 in down in the typical profile: grayish brown (10YR 5/2), light gray (10YR 7/2) dry; strongly cemented. Raw colour is not fired colour.
About the soil
- Parent material: basal till.
- USDA family particle-size class: medial-skeletal.
- Drainage: moderately well drained.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Washington, in these survey areas: Jefferson County Area, Washington.
By state: wild clay in Washington.
USDA, distribution and extent: Northwestern Washington. The series is of small extent.
USDA, geographic setting: Triton soils are on strongly rolling to very steep dissected glacial terraces at an elevation of 400 to 1,800 feet. The soils formed in shallow colluvial and alluvial deposits overlying strongly cemented glacial till with basalt bedrock at depths less tan 40 inches. These soils occur in a mild, cool marine climate having a mean annual temperature of about 49 degrees F. The average summer temperature is 60 degrees F. and the average winter temperature is 38 degrees F. The annual precipitation is 55 to 65 inches, most of which falls as rain during the autumn, winter and spring. The frost free period is 160 to 190 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Quilcene: Strong lead
- Wapato: Promising
- Kitsap: Possible
- Lummi: Possible
- Ahl: Weak indication
- Alderwood: Weak indication
- Beausite: Weak indication
- Belfast: Weak indication
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 100%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Triton very gravelly loam, 0 to 30 percent slopes, map unit TrD in Jefferson County Area, Washington.
- Official Series Description: Triton(revised 09/2004), established.
- Taxonomic class: Medial-skeletal, mixed, mesic, shallow Typic Vitrixerands
- Rated with rule version 2026-09-28.1; the method is on the About page.