Trio soil
Wild-clay potential
Weak indication
Weak indication: no layer of Trio shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Trio soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Trio very fine sandy loam, 0 to 2 percent slopes (Ada County, Idaho) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Bedrock or unweathered rock, not a soil layer to dig for clay.
Layer by layer
- TopsoilAp A very fine sandy loam layer about 0 to 9 in down: about 8% clay, low plasticity when wet, pale brown when moist. Weak indication
- Sandy layerBw A very fine sandy loam layer about 9 to 14 in down: about 8% clay, low plasticity when wet, light gray when moist. Weak indication
- Bkqm A cemented material layer about 14 to 26 in down: USDA gives no clay percentage or texture for it. Not enough data
- Sandy layerBk A very fine sandy loam layer about 26 to 33 in down: about 8% clay, low plasticity when wet, very pale brown when moist. Weak indication
- BedrockRbest layer Bedrock about 33 to 43 in down: no clay layer to dig. Weak indication
What it looks like raw
The bedrock (R), 33 to 43 in down in the typical profile: highly jointed and fractured vesicular basalt. Raw colour is not fired colour.
About the soil
- Parent material: mixed alluvium over bedrock derived from volcanic rock.
- USDA family mineralogy: mixed.
- USDA family particle-size class: loamy.
- Drainage: well drained.
- Lithic bedrock typically about 33 in (84 cm) down.
Where it is mapped
Seen on the map as the most common soil in 3 map units in Idaho, in these survey areas: Ada County, Idaho.
By state: wild clay in Idaho.
USDA, distribution and extent: Southwestern Idaho and possibly adjoining areas. The series is inextensive.
USDA, geographic setting: Trio soils are on basalt plains. Elevations are 2,700 to 3,500 feet. Slopes are 0 to 8 percent. The soils formed in a veneer of wind modified alluvium with a strong loess influence. The climate is middle latitude steppe (Trewartha's Modified Koppen System), with cool moist winters and dry summers. The mean annual precipitation ranges from 8 to 10 inches. The mean January temperature is about 32 degrees F.; the mean July temperature is about 72 degrees F.; and the mean annual temperature is 50 to 54 degrees F. The frost free season is 140 to 160 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aldape: Strong lead
- Aradaran: Strong lead
- Bowns: Strong lead
- Breadloaf: Strong lead
- Brent: Strong lead
- Castlerock: Strong lead
- Catchell: Strong lead
- Chardoton: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Trio very fine sandy loam, 0 to 2 percent slopes, map unit 183 in Ada County, Idaho.
- Official Series Description: Trio(revised 05/2001), established.
- Taxonomic class: Loamy, mixed, superactive, mesic, shallow Xereptic Haplodurids
- Rated with rule version 2026-09-28.1; the method is on the About page.