Toncana soil
Wild-clay potential
Weak indication
Weak indication: no layer of Toncana shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Toncana soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Toncana spot on the map
Rated from the USDA soil survey record for Toncana loam, 40 to 60 percent slopes (Morgan Area, Utah - Morgan County and Part of Weber County) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 31% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (17.5).
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 36 in (91 cm)).
- Note Typically starts about 24 in (61 cm) down; expect real digging or look for cuts and banks.
- Lowers the potential High rock content (about 41% by volume) lowers its practical promise; the clay percentage applies only to the fine earth between the rocks.
Layer by layer
- TopsoilA11 A loam layer about 0 to 4 in down: about 23% clay, moderate plasticity when wet, very dark brown when moist. Weak indication
- TopsoilA12 A loam layer about 4 to 12 in down: about 23% clay, moderate plasticity when wet, very dark brown when moist. Weak indication
- TopsoilA13 A gravelly loam layer about 12 to 24 in down: about 23% clay, moderate plasticity when wet, very dark brown when moist. Weak indication
- Loamy layerB21tB22tB23tbest layer A very gravelly clay loam layer about 24 to 60 in down: about 31% clay, moderate plasticity when wet, dark red when moist. Weak indication
What it looks like raw
The loamy layer (B21tB22tB23t), 24 to 60 in down in the typical profile: dark red (2.5YR 3/6), reddish brown (5YR 5/4) dry; hard, firm, sticky and plastic. Raw colour is not fired colour.
About the soil
- Parent material: colluvium derived from conglomerate.
- USDA family mineralogy: mixed.
- USDA family particle-size class: loamy-skeletal.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Utah, in these survey areas: Morgan Area, Utah - Morgan County and Part of Weber County.
By state: wild clay in Utah.
USDA, distribution and extent: Toncana soils are of small extent in northern Utah; MLRA 47.
USDA, geographic setting: Landform--slightly concave, north- and east-facing mountain slopes
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Ant Flat: Strong lead
- Bertag: Strong lead
- Broadhead: Strong lead
- Crooked Creek: Strong lead
- Donner: Strong lead
- Hawkins: Strong lead
- Herd: Strong lead
- Isbell: Strong lead
See it on the map
Open a Toncana spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Toncana loam, 40 to 60 percent slopes, map unit TaG in Morgan Area, Utah - Morgan County and Part of Weber County.
- Official Series Description: Toncana(revised 03/2023), established.
- Taxonomic class: Loamy-skeletal, mixed, superactive, frigid Pachic Ultic Argixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.