Tarrus soil
Wild-clay potential
Strong lead
Strong lead: a clay-enriched layer typically about 5 to 32 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Tarrus soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Tarrus and Nanford soils, 15 to 25 percent slopes (Moore County, North Carolina) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 43% clay in the fine-earth portion.
- Note USDA labels this a "Bt" horizon: a subsoil layer where clay has accumulated.
- Raises the potential High engineering plasticity index (30): USDA's estimate suggests plastic behavior when wet.
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Thick enough to investigate (about 27 in (68 cm)).
- Note Typically starts within about 5 in (13 cm) of the surface.
- Note Few rock fragments (about 14% by volume).
Layer by layer
- TopsoilAp A gravelly silt loam layer about 0 to 5 in down: about 20% clay, low plasticity when wet. Weak indication
- Clay subsoilBtbest layer A clay layer about 5 to 32 in down: about 43% clay, high plasticity when wet, red when moist. Strong lead
- Clay-rich layerBC A silty clay loam layer about 32 to 40 in down: about 35% clay, moderate plasticity when wet, red when moist. Promising
- Loamy layerC A silt loam layer about 40 to 54 in down: about 18% clay, low plasticity when wet, red when moist. Weak indication
- BedrockCr Weathered bedrock about 54 to 80 in down: no clay layer to dig. Weak indication
What it looks like raw
The clay subsoil (Bt), 5 to 32 in down in the typical profile: red (2.5YR 5/8); firm, slightly sticky, slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: residuum weathered from metavolcanics and/or argillite.
- USDA family mineralogy: kaolinitic. Kaolinite-dominated clays are typically less plastic than smectitic clays.
- USDA family particle-size class: fine.
- Drainage: well drained.
- Paralithic bedrock typically about 44 in (112 cm) down.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in North Carolina, in these survey areas: Moore County, North Carolina.
By state: wild clay in North Carolina.
USDA, distribution and extent: Distribution: North Carolina, South Carolina, and Virginia
USDA, geographic setting: Landscape: Piedmont uplands
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Iredell: Strong lead
- Lignum: Strong lead
- Nanford: Strong lead
- Chewacla: Promising
- Georgeville: Promising
- Tillery: Promising
- Congaree: Possible
- Wehadkee: Possible
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 45%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Tarrus and Nanford soils, 15 to 25 percent slopes, map unit TnE in Moore County, North Carolina.
- Official Series Description: Tarrus(revised 09/2025), established.
- Taxonomic class: Fine, kaolinitic, thermic Typic Kanhapludults
- Rated with rule version 2026-09-28.1; the method is on the About page.