Chewacla soil
Wild-clay potential
Promising
Promising: a loamy layer with some clay typically about 6 to 52 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Chewacla soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Chewacla spot on the map
Rated from the USDA soil survey record for Chewacla loam, 0 to 2 percent slopes, frequently flooded (Guilford County, North Carolina) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clay-enriched layer: about 28% clay in the fine-earth portion.
- Note Moderate engineering plasticity index (19).
- Note Thick enough to investigate (about 46 in (117 cm)).
- Note Typically starts within about 6 in (15 cm) of the surface.
- Note Few rock fragments (about 0% by volume).
Layer by layer
- TopsoilAp A loam layer about 0 to 6 in down: about 13% clay, moderate plasticity when wet, brown when moist. Weak indication
- Loamy layerBwbest layer A sandy clay loam layer about 6 to 52 in down: about 28% clay, moderate plasticity when wet, dark yellowish brown when moist. Promising
- Sandy layerCg A stratified sandy loam layer about 52 to 80 in down: about 11% clay, low plasticity when wet, brown when moist. Weak indication
What it looks like raw
The loamy layer (Bw), 6 to 52 in down in the typical profile: dark yellowish brown (10YR 4/4); friable. Raw colour is not fired colour.
About the soil
- Parent material: loamy alluvium derived from igneous and metamorphic rock.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: somewhat poorly drained.
Where it is mapped
Seen on the map as the most common soil in 8 map units in Georgia, North Carolina, in these survey areas: Davidson County, North Carolina; Douglas County, Georgia; Forsyth County, North Carolina; Guilford County, North Carolina; Moore County, North Carolina; Randolph County, North Carolina.
By state: wild clay in Georgia,wild clay in North Carolina.
USDA, distribution and extent: Distribution: Alabama, Georgia, North Carolina, South Carolina, and Virginia
USDA, geographic setting: Landscape: Piedmont and Coastal Plain river valleys that drain out of the Piedmont
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Appling: Strong lead
- Cecil: Strong lead
- Mecklenburg: Strong lead
- Vance: Strong lead
- Davidson: Strong lead
- Enon: Strong lead
- Helena: Strong lead
- Iredell: Strong lead
See it on the map
Open a Chewacla spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Chewacla loam, 0 to 2 percent slopes, frequently flooded, map unit ChA in Guilford County, North Carolina.
- Official Series Description: Chewacla(revised 12/2025), established.
- Taxonomic class: Fine-loamy, mixed, active, thermic Fluvaquentic Dystrudepts
- Rated with rule version 2026-09-28.1; the method is on the About page.