Stoda soil
Wild-clay potential
Possible
Possible: a loamy layer with some clay typically about 19 to 46 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Stoda soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Rated from the USDA soil survey record for Stoda loam, 10 to 25 percent slopes (Morgan Area, Utah - Morgan County and Part of Weber County) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 23% clay. It may need settling or refining to become a clay body.
- Note Moderate engineering plasticity index (7.5).
- Note The official series description calls the wet soil slightly sticky and slightly plastic.
- Note Thick enough to investigate (about 27 in (69 cm)).
- Note Typically starts within about 19 in (48 cm) of the surface.
- Missing data Rock fragment content is not reported.
- Note USDA reports about 23% calcium carbonate; lime in a clay body deserves testing.
Layer by layer
- TopsoilA11 A loam layer about 0 to 6 in down: about 23% clay, moderate plasticity when wet, very dark grayish brown when moist. Weak indication
- TopsoilA12 A loam layer about 6 to 11 in down: about 23% clay, moderate plasticity when wet, dark brown when moist. Weak indication
- Loamy layerB2 A loam layer about 11 to 19 in down: about 23% clay, moderate plasticity when wet, dark brown when moist. Possible
- Loamy layerC1k,C2k,C3kbest layer A loam layer about 19 to 46 in down: about 23% clay, moderate plasticity when wet, brown when moist. Possible
- Sandy layerC4 A very fine sandy loam layer about 46 to 67 in down: about 18% clay, moderate plasticity when wet, brown when moist. Weak indication
What it looks like raw
The loamy layer (C1k,C2k,C3k), 19 to 46 in down in the typical profile: brown (7.5YR 5/4), pink (7.5YR 7/4) dry; slightly hard, firm, slightly sticky and slightly plastic. Raw colour is not fired colour.
About the soil
- Parent material: lacustrine deposits derived from tuffaceous sandstone.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Utah, in these survey areas: Morgan Area, Utah - Morgan County and Part of Weber County.
By state: wild clay in Utah.
USDA, distribution and extent: Northern Utah. This series is inextensive.
USDA, geographic setting: Stoda soils are at elevations of 4,850 to 5,200 feet. They occur on lake terraces and transition slopes between lake terraces. Slope gradients are 10 to 60 percent. These soils formed in mixed lake sediments. The climate is moist subhumid and the average annual precipita-tion ranges from 18 to 20 inches. The mean annual temperature is 45 to 47 degrees F. The mean summer temperature is 63 to 70 degrees F., and the frost-free period ranges from 100 to 105 days. ASSOCIATED SOILS: These are the Manila, Nebeker, Parleys and Yeats Hollow soils. Manila soils have clay argillic horizons. Nebeker soils have mollic epipedons more than 20 inches thick and have clay argillic horizons. Parleys soils...
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Ant Flat: Strong lead
- Bertag: Strong lead
- Broadhead: Strong lead
- Crooked Creek: Strong lead
- Donner: Strong lead
- Hawkins: Strong lead
- Herd: Strong lead
- Isbell: Strong lead
See it on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 90%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Stoda loam, 10 to 25 percent slopes, map unit SuD in Morgan Area, Utah - Morgan County and Part of Weber County.
- Official Series Description: Stoda(revised 03/2003), established.
- Taxonomic class: Fine-loamy, mixed, superactive, mesic Typic Calcixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.