Stardust soil
Wild-clay potential
Weak indication
Weak indication: no layer of Stardust shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Stardust soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Stardust spot on the map
Rated from the USDA soil survey record for Stardust-Riverpoint complex, 8 to 25 percent slopes (Boise County Area, Idaho, Western Part) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Note Loamy layer with some clay: about 24% clay. It may need settling or refining to become a clay body.
- Note USDA labels this a "Bt2" horizon: a subsoil layer where clay has accumulated.
- Note Moderate engineering plasticity index (15).
- Raises the potential The official series description calls the wet soil moderately sticky and moderately plastic (a field observation, not a ceramic test).
- Note Thick enough to investigate (about 20 in (51 cm)).
- Note Typically starts within about 18 in (46 cm) of the surface.
- Lowers the potential Noticeable rock fragments (about 15% by volume); screening would be needed and the clay percentage applies to the fine earth only.
Layer by layer
- Organic top layerOi An organic top layer about 0 to 1 in down, not a clay body. Weak indication
- TopsoilA1 A fine gravelly loam layer about 1 to 3 in down: about 18% clay, moderate plasticity when wet, grayish brown when moist. Weak indication
- TopsoilA2 A fine gravelly loam layer about 3 to 9 in down: about 19% clay, moderate plasticity when wet, grayish brown when moist. Weak indication
- Clay subsoilBt1 A fine gravelly loam layer about 9 to 18 in down: about 23% clay, moderate plasticity when wet, brown when moist. Weak indication
- Clay subsoilBt2best layer A fine gravelly sandy clay loam layer about 18 to 38 in down: about 24% clay, moderate plasticity when wet, yellowish brown when moist. Weak indication
- Clay subsoilBt3 A gravelly sandy clay loam layer about 38 to 54 in down: about 22% clay, moderate plasticity when wet, pale brown when moist. Weak indication
- Loamy layerBC A gravelly sandy loam layer about 54 to 67 in down: about 19% clay, moderate plasticity when wet, light yellowish brown when moist. Weak indication
What it looks like raw
The clay subsoil (Bt2), 18 to 38 in down in the typical profile: yellowish brown (10YR 5/4), dark yellowish brown (10YR 3/4) moist; hard, firm, moderately sticky and moderately plastic. Raw colour is not fired colour.
About the soil
- Parent material: loamy alluvium.
- USDA family mineralogy: mixed.
- USDA family particle-size class: fine-loamy.
- Drainage: well drained.
Where it is mapped
Seen on the map as the most common soil in 2 map units in Idaho, in these survey areas: Boise County Area, Idaho, Western Part.
By state: wild clay in Idaho.
USDA, distribution and extent: West-central Idaho. MLRA 44 and 43b. Stardust soils are of small extent.
USDA, geographic setting: Stardust soils are nearly level to moderately steep on fan remnants and landslides at elevations of 2,700 to 5,000 feet. These soils formed in alluvium from granitic rocks. Slopes range from 1 to 25 percent. Average annual precipitation is 20 to 26 inches. Average annual temperature is 45 to 48 degrees F. Frost-free period is 90 to 120 days.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Aradaran: Strong lead
- Hann: Strong lead
- McDesh: Strong lead
- Shafer: Strong lead
- Hellake: Promising
- Hillcreek: Promising
- Middlefork: Promising
- Brownlee: Possible
See it on the map
Open a Stardust spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 65%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
- Parts of the Official Series Description could not be interpreted; open the original for the complete text.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Stardust-Riverpoint complex, 8 to 25 percent slopes, map unit 410 in Boise County Area, Idaho, Western Part.
- Official Series Description: Stardust(revised 06/2006), established.
- Taxonomic class: Fine-loamy, mixed, superactive, mesic Ultic Argixerolls
- Rated with rule version 2026-09-28.1; the method is on the About page.