Skowhegan soil
Wild-clay potential
Weak indication
Weak indication: no layer of Skowhegan shows strong clay evidence in the USDA data.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Skowhegan soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Skowhegan spot on the map
Rated from the USDA soil survey record for Skowhegan loamy fine sand (Somerset County, Maine, Southern Part) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Lowers the potential Too little clay to be a clay body on its own: about 3% clay.
- Lowers the potential Low engineering plasticity index (0): little plastic behavior expected when wet.
- Note Thick enough to investigate (about 47 in (119 cm)).
- Note Typically starts within about 18 in (46 cm) of the surface.
- Missing data Rock fragment content is not reported.
Layer by layer
- Organic top layerOe An organic top layer about 0 to 2 in down, not a clay body. Weak indication
- Sandy layerH1 A loamy fine sand layer about 2 to 7 in down: about 3% clay, low plasticity when wet, light brownish gray when moist. Weak indication
- Sandy layerH2 A loamy fine sand layer about 7 to 18 in down: about 3% clay, low plasticity when wet, yellowish red when moist. Weak indication
- Sandy layerH3best layer A sand layer about 18 to 65 in down: about 3% clay, low plasticity when wet, dark gray when moist. Weak indication
What it looks like raw
The sandy layer (H3), 18 to 65 in down in the typical profile: dark gray (5Y 4/1), and gray (5Y 5/1); loose. Raw colour is not fired colour.
About the soil
- Parent material: sandy glaciofluvial deposits derived from slate.
- USDA family mineralogy: mixed.
- USDA family particle-size class: sandy.
- Drainage: moderately well drained.
Where it is mapped
Seen on the map as the most common soil in 1 map unit in Maine, in these survey areas: Somerset County, Maine, Southern Part.
By state: wild clay in Maine.
USDA, distribution and extent: Southern Somerset County, Maine. (MLRA's 143 & 144B) The series is of small extent.
USDA, geographic setting: Skowhegan soils are on outwash plains and stream terraces. Slope ranges from 0 to 8 percent. The soils formed in glacial outwash material of nearly uniform fine and medium sand sizes derived mainly from slate, phyllite, and other dark colored metamorphic and sedimentary rocks. The climate is humid and cool temperate. Mean annual temperature ranges from 38 to 44 degrees F, and mean annual precipitation ranges from 34 to 44 inches. The frost-free season ranges from 80 to 140 days. Elevation ranges from 150 to 1200 feet above mean sea level.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Biddeford: Strong lead
- Buxton: Strong lead
- Lamoine: Strong lead
- Melrose: Strong lead
- Scantic: Strong lead
- Suffield: Strong lead
- Adams: Weak indication
- Bangor: Weak indication
See it on the map
Open a Skowhegan spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 91%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Skowhegan loamy fine sand, map unit Sk in Somerset County, Maine, Southern Part.
- Official Series Description: Skowhegan, established.
- Taxonomic class: Sandy, isotic, frigid Aquic Haplorthods
- Rated with rule version 2026-09-28.1; the method is on the About page.