Lamoine soil
Wild-clay potential
Strong lead
Strong lead: a clayey layer typically about 24 to 65 in below the surface.
A level means "worth investigating". It never confirms usable pottery clay.
This page is about Lamoine soil in general. Whether it lies under a particular spot, and how deep its clay layer sits there, depends on the spot: tap it on the free Wild Clay Archive map at wildclayarchive.com.
Open a Lamoine spot on the map
Rated from the USDA soil survey record for Lamoine silt loam, 3 to 8 percent slopes (Kennebec County, Maine) and the Official Series Description. Depths are typical for the series, not measured at any spot.
Why this level
- Raises the potential Clayey layer: about 44% clay in the fine-earth portion.
- Raises the potential High engineering plasticity index (32): USDA's estimate suggests plastic behavior when wet.
- Note Thick enough to investigate (about 41 in (104 cm)).
- Note Typically starts about 24 in (61 cm) down; expect real digging or look for cuts and banks.
- Note Few rock fragments (about 0% by volume).
- Note Engineering class CH: a clay of high plasticity in the Unified system.
Layer by layer
- TopsoilAp A silt loam layer about 0 to 7 in down: about 23% clay, moderate plasticity when wet, dark brown when moist. Weak indication
- Loamy layerBw A silt loam layer about 7 to 13 in down: about 26% clay, moderate plasticity when wet, light olive brown when moist. Weak indication
- Loamy layerBg A silty clay loam layer about 13 to 24 in down: about 33% clay, high plasticity when wet, light olive brown when moist. Promising
- Clay-rich layerCgbest layer A silty clay layer about 24 to 65 in down: about 44% clay, high plasticity when wet, olive when moist. Strong lead
What it looks like raw
The clay-rich layer (Cg), 24 to 65 in down in the typical profile: olive (5Y 4/3); firm. Raw colour is not fired colour.
About the soil
- Parent material: fine glaciomarine deposits.
- USDA family mineralogy: illitic.
- USDA family particle-size class: fine.
- Drainage: somewhat poorly drained.
Where it is mapped
Seen on the map as the most common soil in 4 map units in Maine, Vermont, in these survey areas: Kennebec County, Maine; Somerset County, Maine, Southern Part; Washington County, Vermont.
By state: wild clay in Maine,wild clay in Vermont.
USDA, distribution and extent: Maine and Vermont. (MLRAs 142, 143, 144A, 144B and 145) The series is of large extent.
USDA, geographic setting: Lamoine soils are on coastal lowlands and river valleys. Slope ranges from 0 to 15 percent. The soils formed in medium, moderately fine and fine textured glaciolacustrine or glaciomarine sediments. The climate is humid and cool temperate. The mean annual precipitation ranges from 864 to 1219 mm, and mean annual temperature ranges from 6 to 8 degrees C. The frost-free season ranges from 90 to 160 days. Elevation ranges from 2 to 274 meters above mean sea level.
Other soils near it
Rated soils mapped in the same counties, stronger leads first.
- Buxton: Strong lead
- Biddeford: Strong lead
- Scantic: Strong lead
- Suffield: Strong lead
- Melrose: Strong lead
- Berkshire: Weak indication
- Peru: Weak indication
- Adams: Weak indication
See it on the map
Open a Lamoine spot on the map
Soil information does not grant access or permission to dig. Verify ownership, local rules, and permission before visiting or collecting.
Important uncertainties
- A component percentage (about 85%) estimates how much of the whole map unit this component covers; it is not the chance that it lies under a spot you look up on the map.
- Layer depths and thicknesses are typical values for the series; the actual profile at a spot can differ substantially.
- Clay percentages describe the fine-earth fraction (particles under 2 mm); rock fragments are reported separately.
- USDA words like "sticky" and "plastic" are field observations on wet soil, not tests of forming, drying, or firing behavior.
Sources
- USDA Soil Data Access (SSURGO): the survey record for Lamoine silt loam, 3 to 8 percent slopes, map unit BuB2 in Kennebec County, Maine.
- Official Series Description: Lamoine(revised 04/2025), established.
- Taxonomic class: Fine, illitic, nonacid, frigid Aeric Epiaquepts
- Rated with rule version 2026-09-28.1; the method is on the About page.